
The AirTAC SE40 Standard Cylinder SE40X175S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 175mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X175S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. Driven by filtered air, it operates efficiently between 0.15 and 1.0 MPa, reaching speeds of 30-800 mm/s. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from washdown environments.
This 40 mm bore unit integrates a built-in magnet for CMSE and DMSE position sensing, allowing precise end-of-stroke detection in automated sequences. Field-adjustable pneumatic cushioning at both ends enables technicians to tune deceleration via a set screw, softening hard end stops during high-velocity 175 mm strokes. The M12x1.25 rod thread and PT1/4 port ensure standardized plumbing and load interfacing for general pneumatic setups.
| Model | Airtac SE40 Standard Cylinder SE40X175S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding jaws of continuous-motion carton erectors, using the 628 N push force to snap corrugated board into shape while the DMSE sensor confirms cycle completion.
Actuates a pivoting divert arm on a modular conveyor line, relying on the 175 mm stroke to push product cleanly into a secondary packaging lane without stalling.
Secures aluminum extrusion blanks in a secondary CNC machining fixture, providing stable 528 N retraction force to hold the part steady against cutting forces.
When sizing this actuator, consider stepping down to a 32 mm bore if your load requires only 402 N of push at 0.5 MPa, or stepping up to a 50 mm bore if your application demands 982 N. Because this is a double-acting cylinder, it relies on continuous air pressure to maintain its position; if your system loses air or the valve centers, the piston will drift. For load-holding without live pressure, explore a BSE rod-lock variant. As a true ISO 15552 profile cylinder, it serves as a direct replacement sharing standard mounting hardware and interface dimensions. At 175 mm of stroke, the 16 mm rod handles moderate side loads, but for heavy off-center loads, an external guide is recommended to prevent rod-bearing bending.
Quick checklist
The SE40X175S generates 628 N of push force and 528 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The pneumatic supply port is PT1/4.
No, the SE40X175S is a standard double-acting cylinder and will drift if air is exhausted or the valve is centered. The adjustable air cushion only decelerates the piston near the stroke ends and does not act as a brake or lock. For fail-safe load holding, use a BSE series rod lock cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.