
The AirTAC SE40 Standard Cylinder SE40X20 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 20mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X20 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact actuation, delivering 628 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machinery spaces while retaining the standardized ISO 15552 footprint.
This 40 mm bore unit features a 16 mm hard-chrome plated rod and a 20 mm stroke, operating at speeds from 30-800 mm/s via a PT1/4 port. Because this specific SKU lacks the S option for a built-in magnet, it operates without electronic or reed position sensing, relying instead on its field-adjustable air cushioning at both ends to decelerate the piston smoothly at stroke extremes.
| Model | Airtac SE40 Standard Cylinder SE40X20 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 628 N of rapid push force to eject small stamped metal pins from a die, utilizing the 20 mm stroke to clear the part in tight tooling clearances.
Actuates a short-stroke folding arm on a packaging line to tuck minor flaps before gluing, benefiting from the flush no-tie-rod profile that prevents cardboard snags.
Secures small fluid dispenser bottles in a laboratory automation cell, using its adjustable end cushions to prevent harsh impacts on delicate glass components.
Selecting the SE40X20 is ideal when you need 628 N of push force at 0.5 MPa within a very short 20 mm travel. If your application requires less force, stepping down to the 32 mm bore yields 402 N of push, while stepping up to the 50 mm bore provides 982 N for heavier loads. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 cylinders, utilizing standard mounting accessories and a PT1/4 port.
Keep in mind that a plain SE cylinder does not hold its position or load when air pressure is lost or the valve is centered; the piston will drift. If your short-stroke application requires positive holding without live pressure, consider the BSE rod lock variant or an external pilot-operated check valve.
Quick checklist
The SE40X20 delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force is 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, the SE40X20 is dimensionally interchangeable per ISO 15552, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using standard mounting hardware and its PT1/4 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.