
The AirTAC SE40 Standard Cylinder SE40X200FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 200mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X200 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. It features an extruded aluminum barrel without external tie rods, yielding a compact footprint that resists corrosion and mounts flush within tight machinery envelopes. This specific SKU is built with an FTC center trunnion mounting interface and a standard PT1/4 port.
Unlike fixed rubber bumpers, this model incorporates a field-adjustable pneumatic cushion at both stroke ends, allowing technicians to dial in end-of-cycle deceleration via a set screw to soften hard impacts at operating speeds up to 800 mm/s. Note that this base configuration omits the internal magnet, meaning it will not directly host CMSE or DMSE position sensors without modification.
| Model | Airtac SE40 Standard Cylinder SE40X200FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a pivot-arm routing gate on a logistics conveyor belt, utilizing the 628 N push force and FTC trunnion mount to smoothly swing heavy cardboard cartons between sorting lanes.
Indexes raw steel bar stock into a CNC lathe spindle, where the 200 mm stroke provides the necessary travel distance and the adjustable cushion softens the retraction stop to protect the feeder mechanism.
Lifts and lowers a film roll carriage on a stretch wrap turntable, relying on the extruded no-tie-rod profile to fit within the machine's narrow vertical column while handling the roll's weight.
This 40 mm bore generates 628 N of thrust at 0.5 MPa (879 N at 0.7 MPa), making it a solid fit for medium-duty positioning. If your application requires less force, stepping down to the 32 mm bore yields 402 N of push, while moving up to the 50 mm bore provides 982 N for heavier payloads. Because this is a standard double-acting cylinder, it cannot hold a load vertically if air pressure is lost or the valve is centered; for position holding, explore the BSE rod-lock variant or an external pilot-operated check valve.
The FTC center trunnion mount is ideal for pivot-mounted loads requiring angular compensation. At 200 mm of stroke, the 16 mm rod and M12x1.25 thread handle moderate side loads, but for any unsupported stroke length approaching 300 mm or beyond, you should incorporate an external guide rail to prevent rod-bearing bending and premature seal wear. Being dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 cylinders without altering your existing mounting hardware.
Quick checklist
The SE40X200 delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, meaning it shares the standard mounting footprint and can serve as a direct replacement for other ISO 15552 profile cylinders. However, this specific SKU does not include the -S magnet option, so it cannot host CMSE or DMSE position sensors without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.