
The AirTAC SE40 Standard Cylinder SE40X200SCA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 200mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X200SCA is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. It features a 40 mm bore, a 200 mm stroke, and a PT1/4 port. Equipped with a built-in magnet, it supports CMSE reed and DMSE electronic position sensors for precise end-of-stroke verification.
Its square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. The field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard end stops during high-speed 30-800 mm/s cycling.
| Model | Airtac SE40 Standard Cylinder SE40X200SCA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing flap on a packaging conveyor, using the 200 mm stroke to shift parcels between sorting lanes with 628 N of push force.
Drives a mechanical arm to fold corrugated carton flaps prior to tape sealing, benefiting from the adjustable cushion to prevent impact damage.
Pushes processed test tube racks out of a centrifuge station, relying on the CA clevis to accommodate slight angular misalignment during extension.
This 40 mm bore provides 628 N push at 0.5 MPa. If your application requires less force, the 32 mm neighbor offers 402 N; if you need greater thrust, stepping up to the 50 mm bore yields 982 N. Because this model includes the CA single clevis mount, it is ready for pivoting articulations. The -S magnet enables direct compatibility with CMSE and DMSE switches. For non-standard strokes exceeding 1200 mm, confirm from datasheet. At 200 mm stroke, side-load is minimal, but always ensure rigid external guidance for heavy loads.
Quick checklist
At 0.5 MPa, the push force is 628 N and the pull force is 528 N. At 0.7 MPa, the push force increases to 879 N. The maximum push force is 128 kgf at 1.0 MPa.
Yes, the SE40X200SCA is dimensionally interchangeable with any standard ISO 15552 profile cylinder, matching mounting dimensions and port sizes. The CA clevis and PT1/4 port allow seamless hardware retrofitting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.