
The AirTAC SE40 Standard Cylinder SE40X204S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 204mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X204S is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, featuring a 40mm bore and a 204mm stroke. Because this stroke deviates from the standard catalog lengths, it is supplied as a non-standard made-to-order unit. It generates 628 N of push force at 0.5 MPa and up to 879 N at 0.7 MPa, making it well-suited for mid-range industrial actuation.
The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. Field-adjustable pneumatic cushioning at both end caps allows technicians to tune deceleration and soften hard mechanical stops during high-speed cycling. Equipped with a built-in magnet, this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors for closed-loop tracking.
| Model | Airtac SE40 Standard Cylinder SE40X204S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 204 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×204 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 628 N push at 0.5 MPa required to fold corrugated cardboard flaps on high-speed packaging lines, while the magnetic piston confirms flap position via DMSE sensors.
Actuates routing gates on beverage conveyors, using its 204mm stroke to shift product lanes smoothly without overwhelming the frame structure.
Opens and closes heavy machine tool safety doors, utilizing the field-adjustable cushioning to prevent slamming and protect the enclosure seals.
Selecting this 40mm bore provides 628 N push at 0.5 MPa, striking a balance between compact size and power. If your application requires less force, stepping down to the 32mm bore yields 402 N of push. Conversely, if you need to drive heavier loads, stepping up to the 50mm bore provides 982 N of push. Because the 204mm stroke exceeds 300mm, no side-load warning is triggered, but always ensure the load is guided to prevent rod-bearing wear.
As a dimensionally interchangeable ISO 15552 cylinder, the SE40X204S serves as a direct replacement for other 40mm profile cylinders, matching standard port sizes (PT1/4) and mounting patterns. Note that the adjustable air cushion only decelerates the piston near the stroke ends; it does not lock or hold the load. If unpowered position holding is required, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
At 0.5 MPa, the SE40X204S provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N. The maximum push force is 128 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and travels at speeds between 30-800 mm/s.
Yes, the SE40X204S is dimensionally interchangeable per ISO 15552 standards. It shares the standardized mounting interface and PT1/4 port size, allowing it to serve as a direct replacement for other 40mm bore profile cylinders without requiring custom brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.