
The AirTAC SE40 Standard Cylinder SE40X210S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 210mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X210S is a double-acting, single-rod ISO 15552 profile cylinder featuring a 40 mm bore and a 210 mm stroke. Because this stroke is non-standard, it is manufactured as a made-to-order unit to deliver exact travel. It produces 628 N of push force and 528 N of pull force at 0.5 MPa, making it well-suited for medium-duty positioning tasks.
This actuator utilizes a square extruded aluminum barrel without external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames. The integrated -S magnet enables position detection via AirTAC CMSE reed and DMSE electronic switches fitted into the sensor grooves. Furthermore, the field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, softening hard impacts during high-speed operation.
| Model | Airtac SE40 Standard Cylinder SE40X210S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing flap on a beverage bottling line, using the 628 N push force and 210 mm stroke to shift containers between parallel conveyors.
Drives a mechanical arm to fold corrugated cardboard flaps prior to sealing, relying on the adjustable cushion to prevent crushing the packaging.
Opens and closes a sliding safety enclosure on a CNC lathe, utilizing the built-in magnet for DMSE electronic end-of-stroke confirmation.
When sizing this actuator, compare its 628 N push at 0.5 MPa against your actual load. If you need less force and a smaller footprint, stepping down to a 32 mm bore yields 402 N of push. Conversely, upgrading to a 50 mm bore provides 982 N of push for heavier masses. Because this is a 210 mm stroke, the unsupported piston rod is subject to bending under lateral loads; always use an external guide to prevent rod-bearing wear.
As a true ISO 15552 profile cylinder, the SE40X210S is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to retrofit existing machine footprints and reuse existing mounting hardware seamlessly. Note that a plain SE cylinder does not hold its load if air pressure is lost or the valve is centered; the piston will drift. For position holding without live air, consider the AirTAC BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N. The maximum push force is 128 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes. The SE40X210S is a standard ISO 15552 / VDMA 24562 profile cylinder, meaning it is dimensionally interchangeable with other ISO 15552 cylinders and can use shared mounting accessories. It features a PT1/4 port and a 16 mm hard-chrome rod.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.