
The AirTAC SE40 Standard Cylinder SE40X220 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 220mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X220 is a double-acting, single-rod ISO 15552 profile cylinder delivering 628 N of push force at 0.5 MPa. Because this 220 mm stroke exceeds the 120 mm standard maximum for a 40 mm bore, it is supplied as a non-standard, made-to-order unit. The extruded aluminum barrel lacks external tie rods, yielding a flush, compact body that resists corrosion and simplifies bracket mounting.
This model features field-adjustable air cushioning at both ends, allowing technicians to tune end-of-stroke deceleration via a set screw rather than relying on a fixed bumper. Note that this specific SKU lacks the built-in magnet (-S), so it does not directly support AirTAC CMSE or DMSE position sensing without modification.
| Model | Airtac SE40 Standard Cylinder SE40X220 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives diverter gates on packaging conveyor lines, utilizing the 628 N push force to redirect heavy cardboard cartons at 30-800 mm/s.
Ejects lightweight stamped parts from small press dies, where the 30 mm adjustable cushion safely slows the 16 mm rod at stroke end.
Actuates pneumatic routing valves in automated laboratory sample analyzers, benefiting from the compact tie-rod-free profile.
For sizing flexibility, stepping down to a 32 mm bore reduces the 0.5 MPa push to 402 N, while stepping up to a 50 mm bore increases it to 982 N. As a standard double-acting cylinder, the SE40X220 will drift if air pressure is lost or the valve is centered; applications requiring strict load-holding should consider the BSE rod-lock variant. Furthermore, at 220 mm of stroke, the 16 mm rod and bearing face bending stresses under lateral loads, making an external guide rail advisable for heavy off-center masses. To retrofit, match the 40 mm bore, 220 mm stroke, PT1/4 port, and standard ISO 15552 mounting accessories.
Quick checklist
The SE40X220 provides 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum of 128 kgf at 1.0 MPa. The 220 mm stroke is a non-standard made-to-order length for the 40 mm bore.
Yes, the SE40X220 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can swap it directly using existing mounting hardware and the standard PT1/4 port, provided your system does not require a position sensor magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.