
The AirTAC SE40 Standard Cylinder SE40X230 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 230mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X230 is a double-acting, single-rod ISO 15552 profile cylinder featuring a 40 mm bore and a 230 mm stroke. It provides a push force of 628 N at 0.5 MPa (879 N at 0.7 MPa) and pulls with 528 N, making it well-suited for medium-duty industrial actuation. The extruded aluminum barrel omits external tie rods, yielding a smooth, compact body that resists corrosion and allows mounting accessories to sit flush against the actuator.
This unit relies on a PT1/4 port and a 16 mm hard-chrome rod with an M12x1.25 thread. Field-adjustable air cushions at both ends let you tune end-of-stroke deceleration to minimize mechanical shock without relying on fixed rubber bumpers. This specific SKU lacks a built-in magnet, so it does not directly support AirTAC CMSE or DMSE position sensing without modification.
| Model | Airtac SE40 Standard Cylinder SE40X230 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Driving the folding arm of a packaging machine, where the 628 N push force reliably opens and forms corrugated boxes at cycle rates up to 800 mm/s.
Actuating a routing flap on a conveyor line to redirect small product pallets, utilizing the 230 mm stroke to clear the transport path entirely.
Securing housings or components during stress and leak testing, where the adjustable cushion smoothly decelerates the 16 mm rod at the stroke end to prevent test damage.
At 0.5 MPa, this 40 mm bore generates 628 N of push force. If your application requires less force, stepping down to the 32 mm bore yields 402 N, while stepping up to the 50 mm bore provides 982 N. Because the stroke is 230 mm, the unsupported rod length increases the risk of side-load bending at the rod bearing; utilizing an external guide rail is strongly recommended to prevent premature wear.
As a dimensionally interchangeable ISO 15552 cylinder, the SE40X230 serves as a direct replacement for other ISO 15552 profile cylinders. To match this configuration, specify the 40 mm bore, 230 mm stroke, PT1/4 port thread, and your preferred mounting accessory (such as FA front flange or LB foot). Note that a plain SE cylinder does not hold its load when air pressure is lost or the valve is centered; if position holding is required, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
The SE40X230 provides a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force is 879 N. The maximum push force is 128 kgf at 1.0 MPa operating pressure.
Yes. The SE40X230 is built to ISO 15552 / VDMA 24562 dimensional standards, meaning it shares identical mounting footprint and pilot dimensions for direct interchangeability with other ISO 15552 profile cylinders, utilizing a PT1/4 port and M12x1.25 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.