
The AirTAC SE40 Standard Cylinder SE40X232S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 232mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X232S is a double-acting, single-rod ISO 15552 profile cylinder engineered for precise pneumatic control. It delivers a robust 628 N push force at 0.5 MPa, making it well-suited for mid-range industrial actuation. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine envelopes.
Equipped with a built-in magnet (-S), this unit seamlessly supports AirTAC CMSE reed and DMSE electronic position sensors along its three integrated sensor grooves. Because the 232 mm stroke exceeds the standard 1000 mm limit for this bore, it is manufactured as a made-to-order configuration, while the field-adjustable air cushioning at both ends ensures smooth deceleration of dynamic loads.
| Model | Airtac SE40 Standard Cylinder SE40X232S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 232 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×232 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 628 N push force required to erect and fold corrugated packaging flaps reliably over the 232 mm travel distance.
Actuates routing gates on modular conveyor lines, using DMSE electronic sensors to confirm stroke endpoints for logistics routing.
Secures variable-height specimen housings in automated test benches, benefiting from the adjustable end cushions to protect delicate components.
If your application requires less thrust, stepping down to the SE32 bore provides 402 N of push at 0.5 MPa, whereas upgrading to the SE50 bore yields 982 N for heavier cycles. As a true ISO 15552 cylinder, it serves as a dimensionally interchangeable direct replacement for other ISO 15552 profile cylinders, simplifying retrofits. Remember that a standard SE cylinder cannot hold a load if air pressure drops; for position holding, consider a BSE rod lock variant. At 232 mm of travel, the unsupported piston rod is susceptible to bending under lateral stress, so an external guide is advised to prevent premature bearing wear.
Quick checklist
This 40 mm bore cylinder generates 628 N of push force and 528 N of pull force at 0.5 MPa, increasing to 879 N of push at 0.7 MPa, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE40X232S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, matching the 40 mm bore, 232 mm stroke, and PT1/4 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.