
The AirTAC SE40 Standard Cylinder SE40X25SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 25mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X25SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact actuation. It delivers 628 N of push force at 0.5 MPa, utilizing a 16mm hard-chrome rod and an M12x1.25 thread. Designed with an extruded aluminum barrel, the square profile omits external tie rods, enabling flush mounting and superior corrosion resistance in tight machinery layouts.
This 40mm bore model includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. The field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling without relying on fixed rubber bumpers.
| Model | Airtac SE40 Standard Cylinder SE40X25SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 628 N push required to snap corrugated carton blanks upright at high cycle rates, with FTC trunnion handling the pivot loads.
Executes rapid 25mm linear diverting movements on packaging conveyors, using the integrated magnet for DMSE sensor confirmation.
Holds lightweight aluminum or plastic workpieces securely during CNC milling, relying on the 528 N pull force for safe retraction.
Stepping down to the 32mm bore reduces the 0.5 MPa push force to 402 N, while moving up to the 50mm bore increases it to 982 N, giving you clear sizing boundaries. For this FTC (front trunnion) mounting setup, ensure your ISO 15552 mounting hardware matches the standardized footprint. Since this is a double-acting cylinder, note that it will drift if air pressure is lost; use a BSE rod lock for positive holding. The 25mm stroke keeps rod-bearing bending stress minimal, negating the need for an external guide.
Quick checklist
At 0.5 MPa, this 40mm bore cylinder provides 628 N push and 528 N pull force. At 0.7 MPa, the push increases to 879 N. The maximum push force is 128 kgf when operating at the maximum rated pressure of 1.0 MPa.
Yes, the SE40X25SFTC is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, retaining your existing FTC mounting hardware and PT1/4 port connections.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.