
The AirTAC SE40 Standard Cylinder SE40X260S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 260mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X260S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force and 528 N of pull force at 0.5 MPa. Driven by a 40 mm bore and a 260 mm stroke, it provides robust linear motion while operating at speeds between 30 and 800 mm/s.
This unit incorporates a built-in magnet (-S) designed specifically for seamless integration with AirTAC CMSE reed and DMSE electronic sensors. Its square extruded aluminum barrel omits external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush against machine frames, while the field-adjustable pneumatic cushioning at both ends actively softens hard end-stop impacts.
| Model | Airtac SE40 Standard Cylinder SE40X260S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Routes plastic PET bottles on a high-speed packaging conveyor using 628 N of push force, relying on the DMSE electronic sensor to confirm gate position.
Folds cardboard carton flaps during automated erecting processes, utilizing the 260 mm stroke to clear the packaging machinery during retraction.
Indexes lightweight goods off accumulation rollers before stretch wrapping, taking advantage of the tie-rod-free extruded barrel for tight frame mounting.
When sizing this actuator, evaluate if 628 N of push at 0.5 MPa matches your payload; if you need less force, stepping down to the 32 mm bore yields 402 N push, whereas stepping up to the 50 mm bore provides 982 N. For this 260 mm stroke, the 16 mm rod and M12x1.25 thread handle moderate side loading, but an external guide is strongly recommended to prevent rod-bearing bending on long unsupported extensions. Remember that a plain SE cylinder does not hold its load when air is lost or the valve is centered; the piston will drift, so integrate a BSE rod lock for critical position-holding. As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard ISO 15552 unit sharing the 40 mm bore, 260 mm stroke, PT1/4 port, and your chosen mounting accessory.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force reaches 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE40X260S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounts designed for other ISO 15552 40 mm bore cylinders, provided your system utilizes the default PT1/4 tapered port and M12x1.25 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.