
The AirTAC SE40 Standard Cylinder SE40X270 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 270mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X270 is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a 40 mm bore and a 270 mm stroke, generating 628 N of push force at 0.5 MPa. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames to save valuable space.
This unit relies on field-adjustable pneumatic cushioning at both ends to decelerate the piston near the stroke limits, allowing you to tune out hard end-stop impacts at speed. Because this specific SKU lacks the built-in magnet suffix, it does not support direct position sensing; if your workflow requires end-of-stroke confirmation, you would need to specify an -S variant to utilize CMSE or DMSE switches.
| Model | Airtac SE40 Standard Cylinder SE40X270 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 628 N extend force to push cardboard cartons off a main sorting belt into secondary chutes without damaging the packaging.
Maintains precise downward pressure on a shrink-wrap film roll, utilizing the 270 mm stroke to accommodate varying roll diameters as material depletes.
Kicks stamped aluminum parts out of a light-duty press bed, relying on the smooth tie-rod-free profile to resist debris buildup in a metalworking cell.
Selecting this 40 mm bore yields 628 N push at 0.5 MPa. If your application demands less force, the adjacent 32 mm bore provides 402 N, while stepping up to the 50 mm bore offers 982 N—giving you clear scaling options on either side. At 270 mm of stroke, the 16 mm rod and M12x1.25 thread handle moderate loads, but you should incorporate an external guide to prevent rod-bearing bending under long unsupported side loads.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard 40 mm bore, 270 mm stroke ISO cylinder with a PT1/4 port and basic mounting. Note that the adjustable air cushion only softens end-of-stroke impacts; it is not a locking mechanism. If your process must hold a load vertically without live air pressure, you must integrate a separate pilot-operated check valve or transition to a BSE rod-lock variant.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes. The SE40X270 adheres strictly to the ISO 15552 profile standard, meaning it shares the exact same mounting interface and PT1/4 port dimensions as comparable ISO 15552 cylinders, allowing for seamless direct retrofitting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.