
The AirTAC SE40 Standard Cylinder SE40X280 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 280mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X280 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting environmental contamination.
This 40 mm bore unit features a 16 mm hard-chrome rod and PT1/4 porting. Field-adjustable air cushions at both stroke ends allow technicians to dial in deceleration, softening hard mechanical impacts during high-speed cycling. Note this SKU lacks the -S magnet, so it cannot host CMSE or DMSE position sensors without modification.
| Model | Airtac SE40 Standard Cylinder SE40X280 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates routing gates on 24V conveyor lines, using the 280 mm stroke to shift cartons between sorting lanes.
Drives the upper sealing jaw on vertical form-fill-seal equipment, applying 628 N to crimp polyethylene wrapping.
Pushes machined aluminum brackets out of a CNC fixture, utilizing the adjustable cushion to prevent end-cap shock.
If 628 N push is insufficient, step up to the 50 mm bore (982 N push @0.5 MPa); if less force is needed, step down to the 32 mm bore (402 N push @0.5 MPa). Because this is a 280 mm stroke, the unsupported 16 mm rod is susceptible to bending under lateral loads—integrate an external guide rail to prevent rod-bearing damage. As a true ISO 15552 cylinder, it provides a direct dimensional replacement for other ISO 15552 profile cylinders, sharing standard FA, LB, and TC mounting hardware.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, push increases to 879 N. The maximum rated push is 128 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
No. The adjustable air cushions only decelerate the piston near stroke end; they are not a locking mechanism. If a vertical load must be held without live pressure, use an AirTAC BSE rod lock cylinder or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.