verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE40 Standard Cylinder SE40X280S

The AirTAC SE40 Standard Cylinder SE40X280S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 280mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke280 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$77.66 $85.16Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE40 stroke, mounting and version on one page All SE40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE40 Standard Cylinder SE40X280S

The AirTAC SE40X280S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force and 528 N of pull force at 0.5 MPa. Driven by a 16 mm hard-chrome piston rod with an M12x1.25 thread, it operates at speeds between 30 and 800 mm/s via a PT1/4 port. The integrated -S magnet allows seamless position tracking using AirTAC CMSE reed or DMSE electronic sensors.

Built with a square extruded aluminum barrel free of external tie rods, this profile body offers a compact, corrosion-resistant envelope that mounts flush in tight machine cavities. The standardized ISO 15552 / VDMA 24562 footprint guarantees dimensional interchangeability with competing profile cylinders, while field-adjustable pneumatic cushioning at both ends lets you tune end-of-stroke deceleration to protect payloads.

Airtac SE40 Standard Cylinder SE40X280S Technical Specifications

ModelAirtac SE40 Standard Cylinder SE40X280S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke280 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE40 Standard Cylinder SE40X280S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
40Bore size in mm.
×280Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE40 Standard Cylinder SE40X280S Is Used

conveyor_belt

Diverting Gate Actuation

Provides the 628 N push force required to pivot heavy package diverting gates on high-speed logistics conveyor lines, using its 280 mm stroke to clear wide pallet lanes.

packaging

Film Roll Tensioning

Maintains steady tension on shrink-wrap film rolls in continuous packaging machinery, relying on the built-in magnet for instant DMSE sensor feedback to prevent web tears.

straighten

Press Brake Ejection

Ejects formed sheet metal parts from CNC press brakes, where the adjustable cushion softens the 280 mm retraction stroke to prevent marring finished surfaces.

Is the Airtac SE40 Standard Cylinder SE40X280S the Right Cylinder?

When sizing this 40 mm bore, stepping down to a 32 mm bore reduces the 0.5 MPa push force to 402 N, whereas stepping up to a 50 mm bore increases it to 982 N. This 280 mm stroke is a standard length, but because it exceeds 300 mm, long unsupported strokes risk rod-bearing bending; pair it with an external guide to handle severe side loads. As a direct replacement, match the 40 mm bore, 280 mm stroke, PT1/4 port, and -S magnet when retrofitting existing ISO 15552 hardware. Remember that the adjustable air cushion only decelerates the piston near stroke end—it is not a locking mechanism, so loads will drift if air pressure is lost.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE40 Standard Cylinder SE40X280S FAQ

The SE40X280S generates 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum of 128 kgf at 1.0 MPa. It uses a PT1/4 tapered port and features a 16 mm rod with an M12x1.25 thread.

Yes, it adheres strictly to the ISO 15552 / VDMA 24562 profile cylinder standard. The square extruded aluminum barrel has no external tie rods, making it dimensionally interchangeable with any ISO 15552 cylinder mounting hardware.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE40 Standard Cylinder SE40X280S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE40X280S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.