verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE40 Standard Cylinder SE40X290

The AirTAC SE40 Standard Cylinder SE40X290 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 290mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke290 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$74.87 $82.37Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE40 stroke, mounting and version on one page All SE40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE40 Standard Cylinder SE40X290

The AirTAC SE40X290 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa. Its extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant exterior that mounts flush against machine frames while freeing up three integrated sensor grooves. A PT1/4 port and 16 mm hard-chrome rod handle medium-duty linear tasks across a 290 mm stroke.

Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, preventing harsh impacts when cycling at speeds up to 800 mm/s. This SKU ships without a piston magnet, so position sensing is not equipped out of the box; adding a CMSE or DMSE switch requires the -S magnet option. The cushion only softens the stop and does not lock the rod.

Airtac SE40 Standard Cylinder SE40X290 Technical Specifications

ModelAirtac SE40 Standard Cylinder SE40X290
SeriesSE ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke290 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE40 Standard Cylinder SE40X290

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
40Bore size in mm.
×290Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE40 Standard Cylinder SE40X290 Is Used

packaging

Carton Erector Flaps

Provides 628 N of push at 0.5 MPa to reliably fold heavy corrugated flaps during continuous packaging line operation.

conveyor_belt

Pallet Diverter Arm

Uses the 290 mm stroke to swing diverter gates across a conveyor belt, routing mixed-SKU pallets smoothly.

straighten

Press Brake Backgauge

Positions sheet metal backstops with a 16 mm rod, leveraging the 30 mm adjustable cushion to soften rapid repositioning stops.

Is the Airtac SE40 Standard Cylinder SE40X290 the Right Cylinder?

Stepping down to a 32 mm bore yields 402 N of push at 0.5 MPa, while moving up to a 50 mm bore provides 982 N, letting you scale thrust precisely for your fixture. Because this is a 290 mm stroke, the 16 mm rod and rod-bearing face bending loads under heavy lateral stress; use an external guide rail to prevent premature wear. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders using the same 40 mm bore, 290 mm stroke, PT1/4 port, and standard mounting hardware. Note that a plain SE exhausts and drifts if air pressure is lost; use a BSE rod lock for position holding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE40 Standard Cylinder SE40X290 FAQ

The SE40X290 generates 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It features a PT1/4 port and a 16 mm piston rod with an M12x1.25 thread.

Yes, the SE40X290 shares the exact ISO 15552 / VDMA 24562 mounting interface, making it a direct retrofit for any standard 40 mm bore profile cylinder. You can reuse existing mounting brackets and rod-end joints.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE40 Standard Cylinder SE40X290

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE40X290 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.