
The AirTAC SE40 Standard Cylinder SE40X30S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 30mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X30S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact, high-cycle tasks. Operating at 0.5 MPa, it generates 628 N of push force and 528 N of pull force, making it well-suited for short-stroke actuation. The extruded aluminum barrel omits external tie rods, yielding a smooth, flush exterior that resists grime buildup and simplifies bracket mounting.
Because this configuration includes the -S option, it features a built-in piston magnet for non-contact position sensing. This allows seamless integration with AirTAC CMSE reed switches or DMSE electronic sensors, which seat directly into the sensor grooves machined on three sides of the body. The field-adjustable pneumatic cushioning at both stroke ends can be tuned to soften end-stop impacts, ensuring quiet operation even at rapid cycling speeds up to 800 mm/s.
| Model | Airtac SE40 Standard Cylinder SE40X30S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 628 N push force at 0.5 MPa to cleanly fold corrugated cardboard flaps on high-speed packaging lines prior to tape sealing.
Leverages the 30 mm stroke to rapidly actuate a routing flap, deflecting small parcels between conveyor belts without lag.
Deploys the -S magnet with DMSE sensors to confirm pin-actuation position precisely when pressing electronic test probes onto circuit boards.
Selecting the SE40X30S is optimal when a short 30 mm stroke and mid-range thrust are required. If your application demands less force, stepping down to the 32 mm bore yields 402 N of push at 0.5 MPa, whereas moving up to the 50 mm bore provides 982 N. This 40 mm bore features a PT1/4 port and a 16 mm rod, providing a robust interface for its 628 N output. As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard 40 mm bore cylinder, sharing identical mounting and rod-end dimensions (M12x1.25). Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism, so loads will drift if air pressure is lost.
Quick checklist
The SE40X30S delivers 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE40X30S is dimensionally interchangeable per ISO 15552. Its standardized mounting interface and M12x1.25 rod thread allow it to serve as a direct replacement for equivalent profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.