
The AirTAC SE40 Standard Cylinder SE40X330 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 330mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X330 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal pneumatics. This clean profile design directly simplifies mechanical integration for OEM assemblies.
This specific SKU is configured without a position sensor magnet, relying instead on its field-adjustable air cushioning at both ends to decelerate the 16 mm rod over a 30 mm cushion length. Because the cushion needle screws are externally accessible, technicians can fine-tune the end-of-stroke deceleration to match actual load velocities without disassembling the cylinder body.
| Model | Airtac SE40 Standard Cylinder SE40X330 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 330 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×330 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 628 N push force required to actuate diverting arms on packaging conveyor lines, smoothly routing cardboard cartons at speed.
Secures aluminum castings inside CNC machining centers; the 330 mm stroke accommodates varying part widths while the adjustable cushion softens the clamp impact.
Indexes wooden pallets along roller conveyors in distribution hubs, utilizing the full 330 mm extension to stage loads for automated wrapper stations.
When sizing this 40 mm bore model, evaluate your actual force requirements: if 528 N of pull at 0.5 MPa is insufficient, step up to the 50 mm bore (982 N push), or if you are over-cycling, step down to the 32 mm bore (402 N push). As a standard double-acting cylinder, the SE40X330 does not hold its position or load when air pressure is lost or the valve is centered; the piston will drift. If your application demands fail-safe load holding, pivot to the BSE series rod lock or an external pilot-operated check valve.
With a 330 mm stroke, the unsupported 16 mm rod is subject to bending under lateral loads. To prevent premature rod-bearing wear, use an external guide rail to support the load rather than relying on the cylinder itself. For direct retrofits, this cylinder offers direct dimensional interchangeability with other ISO 15552 cylinders, matching the 40 mm bore, 330 mm stroke, PT1/4 port, and standard mounting accessories exactly.
Quick checklist
The SE40X330 generates 628 N of push force and 528 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 879 N. The maximum rated push force is 128 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE40X330 is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 cylinders with a 40 mm bore, 330 mm stroke, and PT1/4 port, reusing your existing mounting hardware. Note that this specific SKU lacks a sensor magnet for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.