
The AirTAC SE40 Standard Cylinder SE40X35 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 35mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X35 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. Its 35 mm stroke and 40 mm bore make it a compact choice for short linear actuation. The extruded aluminum square barrel omits external tie rods, yielding a flush, corrosion-resistant housing that simplifies direct mounting in tight machine envelopes.
This unit features field-adjustable pneumatic cushioning at both ends, allowing technicians to tune end-of-stroke deceleration via a set screw rather than relying on a fixed rubber bumper. Since this specific SKU lacks the -S magnet option, it does not support CMSE or DMSE position sensing out of the box.
| Model | Airtac SE40 Standard Cylinder SE40X35 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives short 35 mm folding arms on case erecting lines, using its 628 N push force to cleanly tuck flaps before tape sealing.
Actuates a short-stroke routing gate to redirect small totes between conveyor lanes without overpowering the lightweight packaging.
Ejects machined aluminum brackets from a CNC fixture, relying on the 30 mm adjustable cushion to prevent part marring at high speed.
Delivering 628 N push at 0.5 MPa, this 40 mm bore fits mid-range clamping tasks. If your assembly requires less force, the 32 mm bore offers 402 N push; for heavier loads, stepping up to the 50 mm bore provides 982 N push. Remember that a plain SE cylinder cannot hold a load if air pressure drops or the valve centers—the piston will drift, so use a BSE rod lock variant if static holding is mandatory. For this 35 mm stroke, side-load bending is minimal, but long unsupported strokes still need an external guide. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting accessories, a PT1/4 port, and a 16 mm rod with an M12x1.25 thread.
Quick checklist
The SE40X35 generates 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates at 30-800 mm/s with a PT1/4 port and a 16 mm rod.
Yes, it is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and can serve as a direct replacement for other ISO 15552 profile cylinders without requiring new bracketry.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.