
The AirTAC SE40 Standard Cylinder SE40X35S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 35mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X35S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact, short-stroke actuation. It provides a 628 N push force at 0.5 MPa and a 528 N pull force, making it well-suited for mid-range linear tasks. The 35 mm stroke is non-standard but falls safely within the 25-1200 mm standard manufacturing range for this 40 mm bore.
This unit includes a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. Its square extruded aluminum barrel eliminates external tie rods, keeping the body smooth and corrosion-resistant while allowing flush mounting on machinery. Furthermore, the field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration via a setscrew rather than relying on a fixed rubber bumper.
| Model | Airtac SE40 Standard Cylinder SE40X35S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides a 628 N push at 0.5 MPa to secure aluminum engine blocks during CNC milling, using its 35 mm stroke for rapid clamp engagement.
Uses the 528 N retract force and built-in DMSE sensor feedback to time the precise folding of corrugated cardboard flaps on high-speed packaging lines.
Actuates a short-stroke routing gate to sort small parcels on conveyor belts, benefiting from the tie-rod-free extruded barrel for flush side-mounting.
When sizing this actuator, note that stepping down to a 32 mm bore reduces the 0.5 MPa push force to 402 N, while stepping up to a 50 mm bore increases it to 982 N. Because this is a standard double-acting cylinder, it will not hold a load if air pressure is lost or the valve is centered; the piston will drift. For position-holding requirements, consider the BSE rod-lock variant or an external pilot-operated check valve. As a true ISO 15552 cylinder, this model is dimensionally interchangeable with other ISO 15552 cylinders, sharing standard mounting hardware and footprint for easy retrofits.
Quick checklist
At 0.5 MPa, the SE40X35S delivers 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N. The maximum push force is 128 kgf at 1.0 MPa.
Yes, the SE40X35S is dimensionally interchangeable per ISO 15552 standards. It shares the standardized mounting interface and port sizes (PT1/4), allowing it to serve as a direct replacement for other ISO 15552 profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.