verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE40 Standard Cylinder SE40X408S

The AirTAC SE40 Standard Cylinder SE40X408S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 408mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke408 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$93.02 $100.52Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE40 stroke, mounting and version on one page All SE40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE40 Standard Cylinder SE40X408S

The AirTAC SE40X408S is a double-acting single-rod profile cylinder operating to the ISO 15552 standard. It delivers 628 N of push force and 528 N of pull force at 0.5 MPa, making it well-suited for mid-range industrial actuation. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.

Because this unit includes the -S magnet code, it is fully primed for AirTAC CMSE reed and DMSE electronic position sensing. The integrated pneumatic cushioning at both ends is field-adjustable via a set screw, allowing you to precisely tune end-of-stroke deceleration and eliminate hard mechanical impacts on the line.

Airtac SE40 Standard Cylinder SE40X408S Technical Specifications

ModelAirtac SE40 Standard Cylinder SE40X408S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke408 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE40 Standard Cylinder SE40X408S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
40Bore size in mm.
×408Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE40 Standard Cylinder SE40X408S Is Used

packaging

Carton Erector Arm

Drives the folding mechanism on packaging lines, utilizing the 408mm stroke to open and form corrugated boxes with 628N of push force at 0.5 MPa.

conveyor_belt

Package Diverter

Pushes routed parcels onto secondary chutes, relying on the built-in -S magnet to trigger DMSE electronic sensors for precise divert timing.

precision_manufacturing

Component Stamping

Feeds sheet metal blanks into a light-duty stamping press, using the adjustable pneumatic cushion to soften the rapid 30-800 mm/s retraction stops.

Is the Airtac SE40 Standard Cylinder SE40X408S the Right Cylinder?

If your application requires less thrust, stepping down to the 32mm bore yields 402 N of push at 0.5 MPa; conversely, moving up to the 50mm bore provides 982 N. As a standard double-acting cylinder, the SE40X408S does not hold a load safely if air pressure is lost or the valve is centered—the piston will drift. For position-holding safety, consider the BSE rod-lock variant. At 408 mm of stroke, the 16mm rod and M12x1.25 thread face potential bending moments under heavy lateral loads; always use an external guide to support the tooling. This model is dimensionally interchangeable per ISO 15552, meaning it drops right into existing footprints sharing the PT1/4 port and standard mounting accessories.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE40 Standard Cylinder SE40X408S FAQ

The SE40X408S delivers 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It features a 40mm bore, a 16mm rod, and a PT1/4 port.

Yes, the SE40X408S is dimensionally interchangeable per ISO 15552. You can drop it directly into existing mounts sharing the standard footprint. The -S magnet also ensures out-of-the-box compatibility with AirTAC CMSE and DMSE sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE40 Standard Cylinder SE40X408S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE40X408S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.