
The AirTAC SE40 Standard Cylinder SE40X410 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 410mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X410 is a double-acting, single-rod profile cylinder built to ISO 15552 dimensions, delivering 628 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies bracket installation. This design is dimensionally interchangeable with other ISO 15552 cylinders, making it a straightforward direct retrofit.
This 40 mm bore unit travels a 410 mm stroke and relies on a field-adjustable pneumatic cushion at both ends to decelerate the piston smoothly. Because this specific SKU lacks the -S magnet code, it is not equipped for AirTAC CMSE or DMSE position sensing out of the box. The cushioning screws allow technicians to tune end-of-stroke deceleration precisely, preventing harsh impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE40 Standard Cylinder SE40X410 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 410 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×410 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a 410 mm stroke folding arm on packaging lines, using its 628 N push force to tuck heavy cardboard flaps prior to tape sealing.
Extracts automated sample handling trays to a 410 mm clearance distance, benefiting from the smooth adjustable cushion to protect delicate glassware.
Pushes populated electronics panels out of a test fixture, utilizing the tie-rod-free profile to mount flush against the machine frame.
Selecting this 40 mm bore makes sense when an application requires 628 N push at 0.5 MPa. If you need less force, stepping down to the 32 mm bore yields 402 N push; if your load demands more thrust, stepping up to the 50 mm bore provides 982 N push. This model uses a PT1/4 port and a 16 mm rod. When replacing a cylinder, verify the 410 mm stroke, PT1/4 thread, and mounting accessory match your existing ISO 15552 footprint.
Because the 410 mm stroke creates a long unsupported rod extension, side-load bending forces on the rod bearing increase significantly. To prevent premature seal wear and rod deformation, guide the load externally rather than relying on the cylinder itself to absorb radial stress. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost. If your process requires fail-safe position holding, consider a BSE rod lock variant.
Quick checklist
At 0.5 MPa, the SE40X410 generates 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N. The maximum push force is 128 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes, it shares the exact ISO 15552 / VDMA 24562 mounting interface, making it a direct replacement for other standard profile cylinders. However, this specific SKU does not include the -S magnet, so it cannot host CMSE or DMSE electronic position sensors without modifying the piston.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.