
The AirTAC SE40 Standard Cylinder SE40X425 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 425mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X425 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, resulting in a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal pneumatics.
This 40 mm bore unit travels 425 mm on a 16 mm hard-chrome rod with an M12x1.25 thread. Because this specific SKU lacks the built-in magnet (-S), it does not support CMSE or DMSE position sensing out of the box. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a screw, actively softening impacts rather than relying on a fixed rubber bumper.
| Model | Airtac SE40 Standard Cylinder SE40X425 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding mechanism on continuous packaging lines, utilizing the 425 mm stroke to clear wide corrugated cartons and 628 N push to cleanly tuck flaps before sealing.
Shifts heavy warp beams between processing stations in weaving mills, where the tie-rod-free extruded profile prevents lint buildup and allows flush mounting in tight loom alleys.
Pushes populated printed circuit boards out of an SMT oven magazine, relying on the precisely tuned adjustable air cushions to prevent shock damage to delicate solder joints at end of stroke.
If 628 N of push at 0.5 MPa is too much for your fixture, stepping down to the 32 mm bore yields 402 N. If you need more clamping authority, the 50 mm bore provides 982 N. To match this exact ISO 15552 footprint for a retrofit, specify a 40 mm bore, 425 mm stroke, PT1/4 port, and your required mounting accessory.
Because the stroke is 425 mm, the unsupported rod length increases susceptibility to bending under side loads. For this length, incorporating an external guide rail is strongly recommended to prevent rod-bearing wear. Note that a plain SE cylinder will drift if air pressure is lost or the valve is centered; it cannot hold a load without live pressure. If your process requires mechanical position holding, consider the BSE rod lock variant.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N, with a maximum push of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE40X425 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting interface and can serve as a direct replacement for other ISO 15552 profile cylinders. It features a PT1/4 port and adjustable air cushions at both ends, but note this specific SKU lacks a sensor magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.