
The AirTAC SE40 Standard Cylinder SE40X45 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 45mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X45 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa, making it well-suited for mid-range actuation tasks.
Its square extruded aluminum barrel eliminates external tie rods, keeping the body smooth and corrosion-resistant for flush mounting. The field-adjustable air cushion at both ends lets you tune end-of-stroke deceleration to protect tooling. Note that this specific SKU lacks a built-in magnet, so it does not support CMSE or DMSE position sensors out of the box.
| Model | Airtac SE40 Standard Cylinder SE40X45 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding mechanism on packaging lines, using the 628 N push force to snap cardboard flaps securely into place during high-speed carton forming.
Actuates a routing gate on a conveyor belt system, relying on the 45 mm stroke to push parcels cleanly onto a secondary sorting track.
Applies precise clamping pressure to small material samples in laboratory testing equipment, where the 528 N pull force securely retracts the jaw.
If 628 N of push at 0.5 MPa is too much for your payload, stepping down to the 32 mm bore yields 402 N. If you need more thrust, the 63 mm bore provides 1559 N. Remember that a plain SE cylinder does not hold a load if air pressure drops; the piston will drift, so use a BSE rod lock for fail-safe holding.
This 45 mm stroke uses a PT1/4 port and an M12x1.25 rod thread. Because it is dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 profile cylinders using existing mounting hardware.
Quick checklist
The SE40X45 delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force is 879 N, with a maximum push of 128 kgf at 1.0 MPa. It features a PT1/4 port and a 16 mm rod with an M12x1.25 thread.
Yes, the SE40X45 is dimensionally interchangeable per ISO 15552. Its standardized mounting interface allows it to serve as a direct replacement for other ISO 15552 profile cylinders, sharing standard mounting accessories without requiring custom brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.