
The AirTAC SE40 Standard Cylinder SE40X5 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 5mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X5 is a double-acting, single-rod ISO 15552 profile cylinder engineered for ultra-short stroke duties, delivering 628 N of push force at 0.5 MPa. Because this SKU lacks the built-in magnet option, it is built strictly for mechanical actuation rather than position sensing. Its square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that drops easily into tight machinery envelopes.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, protecting compact mechanisms from harsh impacts. The 16 mm hard-chrome plated rod and M12x1.25 thread provide a robust interface for high-cycle clamping, and the standardized ISO 15552 mounting interface guarantees true dimensional interchangeability with comparable profile cylinders.
| Model | Airtac SE40 Standard Cylinder SE40X5 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 5 mm stroke and 628 N push force to rapidly eject small stamped metal parts from a die before the press retracts.
Provides a short, compact 5 mm clamping action to hold minor packaging flaps stationary while adhesive cures.
Acts as a hard mechanical stop in a circuit board bending fixture, relying on the 16 mm rod to resist side loads.
Selecting this 40 mm bore is ideal when 628 N of push at 0.5 MPa is required within a minimal 5 mm stroke footprint. If your application needs less force, stepping down to the 32 mm bore yields 402 N of push; conversely, scaling up to the 50 mm bore provides 982 N. Because this is a 5 mm stroke, it falls outside the standard stroke table and is manufactured as a made-to-order item.
This plain SE cylinder does not hold its load when air is exhausted or the valve is centered, as the piston will drift. If your setup requires position holding without live pressure, consider the BSE rod lock variant. To retrofit this into an existing line, match the 40 mm bore, 5 mm stroke, PT1/4 port, and your required mounting accessory.
Quick checklist
At 0.5 MPa, the SE40X5 provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N. The maximum push force is 128 kgf when operated at the maximum 1.0 MPa pressure.
Yes. The SE40X5 is dimensionally interchangeable per the ISO 15552 standard, meaning it shares the exact same mounting footprint and body interface as other ISO 15552 profile cylinders. You can swap it in as a direct replacement without modifying your existing machinery plates.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.