
The AirTAC SE40 Standard Cylinder SE40X50SCB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 50mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X50SCB is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering 628 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The built-in magnet enables position detection with CMSE reed or DMSE electronic sensors.
Equipped with a CB double clevis mount, this 40 mm bore unit pivots smoothly on a rear pin to accommodate articulating linkages. Field-adjustable pneumatic cushioning at both ends allows you to tune the end-of-stroke deceleration via a set screw, preventing harsh mechanical impacts during rapid 50 mm strokes.
| Model | Airtac SE40 Standard Cylinder SE40X50SCB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 628 N push and 50 mm travel needed to tuck packaging flaps on a continuous carton sealing line.
Leverages the CB clevis mount to pivot a sorting gate smoothly, redirecting small parts on a high-speed conveyor belt.
Uses the integrated magnet with DMSE sensors to confirm ejection of light machined parts from a CNC fixture in 50 mm.
This 40 mm bore generates 628 N push at 0.5 MPa. If your application requires less force, stepping down to the 32 mm bore yields 402 N; if you need more thrust, stepping up to the 50 mm bore provides 982 N. The CB double clevis mounting supplied here is ideal for pivoting loads, and the PT1/4 porting mates perfectly with standard ISO 15552 hardware. Because this is a double-acting cylinder, it will drift if air pressure is lost and cannot hold a load without live pressure or an external rod lock.
With a 50 mm stroke, the 16 mm piston rod experiences minimal bending stress, making it well-suited for high-speed cyclic actuation without requiring an external guide.
Quick checklist
At 0.5 MPa it provides 628 N push and 528 N pull. At 0.7 MPa the push force is 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE40X50SCB is dimensionally interchangeable with any standard ISO 15552 profile cylinder. You can swap it directly using existing mounting hardware, including the CB double clevis bracket, without altering the machine footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.