
The AirTAC SE40 Standard Cylinder SE40X50SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 50mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X50SFTC is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a 628 N push at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact body that resists corrosion and mounts flush against machine frames.
This 40 mm bore unit includes a built-in magnet for CMSE or DMSE position sensing and uses an FTC centre trunnion mounting style. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration, protecting payloads during rapid 30-800 mm/s cycling.
| Model | Airtac SE40 Standard Cylinder SE40X50SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding mechanism on packaging lines, using the 50 mm stroke and 628 N push to rapidly erect cardboard carton flaps without buckling the material.
Pivots a diverter arm via the FTC trunnion mount on a conveyor belt system, accurately redirecting small totes at high speed with reliable position feedback.
Actuates an electronic testing probe array, utilizing the built-in magnet and DMSE sensor to verify precise 50 mm extension before applying test pressure.
When sizing this actuator, compare its 628 N push against your load requirements. If you need less force, stepping down to the 32 mm bore yields a 402 N push, while stepping up to the 50 mm bore provides 982 N. Because this is a double-acting cylinder, it will drift if air pressure is lost; use a BSE rod lock for fail-safe holding.
The SE40X50SFTC is dimensionally interchangeable with other ISO 15552 profile cylinders, making it a direct replacement. It features a PT1/4 port, an M12x1.25 rod thread, and the FTC trunnion accessory for pivoting loads.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push and 528 N of pull. At 0.7 MPa, the push increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE40X50SFTC is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using the existing FTC trunnion mounting hardware and PT1/4 ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.