
The AirTAC SE40 Standard Cylinder SE40X50SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 50mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X50SN is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force and 528 N of pull force at 0.5 MPa. Driven by a 16 mm hard-chrome plated rod with an M12x1.25 thread, it provides reliable linear motion within a standardized VDMA 24562 footprint.
This 40 mm bore unit features a built-in magnet for CMSE reed and DMSE electronic position sensing, paired with NBR seals for standard pneumatic duty. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant exterior that mounts flush against machine frames, while field-adjustable air cushions at both ends allow technicians to fine-tune end-of-stroke deceleration and eliminate hard metal-on-metal impacts.
| Model | Airtac SE40 Standard Cylinder SE40X50SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 628 N push force required to fold and secure heavy cardboard flaps on high-speed packaging lines, utilizing the 50 mm stroke for rapid, compact cycling.
Drives lightweight sorting gates on conveyor systems, where the NBR seals withstand ambient dust and the built-in magnet triggers DMSE electronic sensors for exact package routing.
Handles the sliding action of safety machine doors, leveraging the smooth, tie-rod-free extruded aluminum profile to prevent debris accumulation and ensure consistent motion.
Selecting this 40 mm bore yields 628 N of push at 0.5 MPa, striking a balance between the smaller 32 mm bore (402 N push) and the larger 50 mm bore (982 N push), allowing you to step up or down to match exact load requirements. The PT1/4 port and 50 mm stroke make it highly versatile for compact assemblies.
Because it is a standard double-acting cylinder, the SE40X50SN cannot hold a load if air pressure drops or the valve centers; the piston will drift, so applications requiring mid-stroke locking must integrate an external pilot-operated check valve or explore the BSE rod-lock variant. Dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 profile cylinders, utilizing existing mounting hardware and matching the 40 mm bore, 50 mm stroke, PT1/4 port, and -S magnet specifications.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, and it reaches a maximum push of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders, serving as a direct replacement using standard mounting hardware. It features field-adjustable air cushions at both ends, allowing you to tune the screw to soften end-of-stroke impacts; however, this cushion only decelerates the piston and does not lock or hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.