verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE40 Standard Cylinder SE40X520S

The AirTAC SE40 Standard Cylinder SE40X520S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 520mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke520 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$109.56 $117.06Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE40 stroke, mounting and version on one page All SE40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE40 Standard Cylinder SE40X520S

The AirTAC SE40X520S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 628 N and a pull force of 528 N at 0.5 MPa. Its extruded aluminum barrel lacks external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. The integrated -S magnet enables direct position tracking using CMSE reed or DMSE electronic sensors along the multiple sensor grooves.

To absorb kinetic energy at the stroke ends, this unit employs a field-adjustable pneumatic cushion at both ends rather than a fixed rubber bumper. Technicians can tune the cushioning needle to soften hard end stops dynamically. Operating at speeds of 30-800 mm/s with a PT1/4 port and a 16 mm rod, it is designed for rigorous automated cycling.

Airtac SE40 Standard Cylinder SE40X520S Technical Specifications

ModelAirtac SE40 Standard Cylinder SE40X520S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke520 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE40 Standard Cylinder SE40X520S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
40Bore size in mm.
×520Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE40 Standard Cylinder SE40X520S Is Used

conveyor_belt

Pallet Diverters

Uses the 520 mm stroke to push heavy pallets cleanly across transfer lanes, relying on the 628 N push force to overcome friction without stalling.

packaging

Case Erectors

Extends to fold and seal corrugated cardboard flaps, using the adjustable end cushions to prevent crushing the packaging material at high speed.

science

Lab Sample Handlers

Moves sample racks between testing stations, using the -S magnet and DMSE electronic sensors to confirm exact rack positioning over analyzers.

Is the Airtac SE40 Standard Cylinder SE40X520S the Right Cylinder?

When sizing this 40 mm bore actuator, compare its 628 N push force at 0.5 MPa against the neighboring bores: stepping down to a 32 mm bore yields 402 N, while stepping up to a 50 mm bore provides 982 N. Because this model features a 520 mm stroke, the extended piston rod is highly susceptible to side-load bending; always support the load with an external guide bearing to prevent premature rod seal failure.

As a true ISO 15552 profile cylinder, the SE40X520S is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to drop it into existing footprints (LB, FA, FB) without machining. Note that the adjustable air cushion only decelerates the piston near stroke end and does not lock the load; if your process requires position holding without live air pressure, consider the BSE rod-lock variant or an external pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE40 Standard Cylinder SE40X520S FAQ

The SE40X520S generates 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It uses a PT1/4 port and operates at speeds from 30-800 mm/s.

Yes, it is dimensionally interchangeable with any standard ISO 15552 profile cylinder, sharing standard mounting dimensions. However, it does not hold position when air is lost; the adjustable cushion only decelerates the piston near stroke end and is not a locking mechanism.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE40 Standard Cylinder SE40X520S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE40X520S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.