
The AirTAC SE40 Standard Cylinder SE40X540S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 540mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X540S is a double-acting single-rod ISO 15552 profile cylinder delivering 628 N of push force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The included -S magnet enables direct fitment of CMSE reed or DMSE electronic sensors along the three integrated side grooves.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycles. This 540 mm stroke configuration uses a PT1/4 port and an M12x1.25 rod thread, engineered for precise actuation in standard automation environments.
| Model | Airtac SE40 Standard Cylinder SE40X540S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 540 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×540 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates diverting mechanisms on packaging lines, utilizing the 540 mm stroke to push cardboard cartons cleanly across a 500 mm wide conveyor belt.
Opens and closes sliding safety doors on CNC lathes, where the 628 N push force reliably overcomes guide resistance and the -S magnet tracks door position.
Deploys pneumatic stop gates at palletizing stations, absorbing end-of-stroke kinetic energy through its adjustable cushioning to halt loaded pallets smoothly.
This 40 mm bore generates 628 N push at 0.5 MPa. If your assembly requires less force, step down to the 32 mm bore yielding 402 N; for heavier payloads, step up to the 50 mm bore providing 982 N. Because this is a 540 mm stroke, the unsupported rod length introduces bending risks on the M12x1.25 rod bearing under lateral loads, making an external guide rail essential for stable travel. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 cylinders, sharing standard mounting hardware and a PT1/4 port. Note that a plain SE cylinder drifts when air is lost; if the application must hold a load without live pressure, consider a BSE rod lock variant.
Quick checklist
At 0.5 MPa, the push force is 628 N and the pull force is 528 N. At 0.7 MPa, the push force is 879 N. The maximum push force is 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No. The adjustable air cushion only decelerates the piston near the stroke end; it is not a brake. If air is lost or the valve is centered, the piston drifts. For position holding without live pressure, use a BSE rod lock cylinder or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.