
The AirTAC SE40 Standard Cylinder SE40X575S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 575mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X575S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 40 mm bore and a 575 mm stroke. It provides a 628 N push force at 0.5 MPa, utilizing a PT1/4 port and a 16 mm hard-chrome piston rod with an M12x1.25 thread. The extruded aluminum barrel lacks external tie rods, yielding a smooth, compact profile that resists corrosion and simplifies flush mounting within tight machine envelopes.
This specific configuration includes a built-in magnet (-S) for position sensing with AirTAC CMSE reed or DMSE electronic switches. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, preventing harsh impacts during high-speed cycling. The standardized ISO 15552 mounting interface ensures seamless dimensional interchangeability with other compliant profile cylinders.
| Model | Airtac SE40 Standard Cylinder SE40X575S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 575 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×575 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing gate on a 24V DC conveyor line, using the 575 mm stroke to shift pallets smoothly between parallel transport lanes.
Drives the mechanical arms that fold minor flaps on a continuous carton sealing machine, relying on the 628 N push force to overcome cardboard resistance.
Extends to push filled test tubes out of a centrifuge carousel, utilizing the adjustable end cushions to protect delicate glass at 800 mm/s.
When sizing this actuator, compare its 628 N push at 0.5 MPa against the neighboring bores: stepping down to a 32 mm bore yields 402 N, while stepping up to a 50 mm bore provides 982 N. Because this is a standard 575 mm stroke (within the 1200 mm maximum for this bore), it is readily available. However, at this extended length, the 16 mm rod and bearing are susceptible to bending under lateral loads, so an external guide rail should be used to prevent premature wear.
For retrofitting, this model maps directly to a 40 mm bore, 575 mm stroke, PT1/4 port, and basic mounting interface, requiring only your preferred ISO 15552 accessory. Remember that a standard SE cylinder relies on live air pressure to maintain its position; if air is lost, the piston will drift. For applications requiring fail-safe load holding, consider the BSE rod-lock variant. The included -S magnet enables direct compatibility with CMSE and DMSE sensors without extra hardware.
Quick checklist
At 0.5 MPa, the push force is 628 N and the pull force is 528 N. At 0.7 MPa, the push force is 879 N. The maximum push force is 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE40X575S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and bore/stroke dimensions. You can swap it directly into existing ISO 15552 profile cylinder setups using your current mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.