
The AirTAC SE40 Standard Cylinder SE40X580 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 580mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X580 is a double-acting single-rod ISO 15552 profile cylinder engineered for a 580 mm stroke. It features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that resists corrosion and mounts flush on packaging machinery. Operating at 0.5 MPa, it generates 628 N of push force and 528 N of pull force.
This unit relies on field-adjustable pneumatic cushioning at both ends to decelerate the piston near stroke end, allowing you to tune out hard end stops at high cycle rates. Because this specific SKU lacks the -S magnet code, it does not support AirTAC CMSE or DMSE position sensors without modification. The 30 mm cushion length and PT1/4 porting ensure reliable airflow for its 30-800 mm/s speed range.
| Model | Airtac SE40 Standard Cylinder SE40X580 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 580 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×580 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives 580 mm stroke arms on sorting conveyors to push parcels, utilizing the 628 N push force to handle moderate-weight boxes at high cycle rates.
Folds and secures corrugated cardboard blanks on automated packaging lines, where the adjustable cushion softens the impact at the end of the 580 mm extension.
Positions multi-tier sample trays in analytical instruments, relying on the clean-profile extruded barrel to fit within tight equipment chassis without tie-rod obstructions.
Generating 628 N push at 0.5 MPa, this 40 mm bore is a mid-range actuator. If your assembly requires less force, stepping down to the 32 mm bore yields 402 N push. Conversely, if you need more power, stepping up to the 50 mm bore provides 982 N push. For a direct ISO 15552 replacement, match the 40 mm bore, 580 mm stroke, PT1/4 port, and your required mounting accessory. Note that a plain SE cylinder drifts when air is lost; use a BSE rod lock if the application must hold a load without live pressure. At 580 mm, the unsupported stroke places bending stress on the rod bearing, so an external guide is strongly recommended to prevent premature seal wear.
Quick checklist
The SE40X580 generates 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa.
Yes, the SE40X580 is dimensionally interchangeable per ISO 15552, meaning it shares the standardized mounting footprint and can serve as a direct retrofit for other ISO 15552 profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.