
The AirTAC SE40 Standard Cylinder SE40X60H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 60mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X60H is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering 628 N of push force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This specific SKU utilizes a high-temperature FKM (Viton) seal, widening the operating range to 0-150 C for hot environments. It lacks a position-sensing magnet, but the integrated sensor grooves on three sides of the body allow easy external mounting of CMSE or DMSE switches if you later swap to an -S variant.
| Model | Airtac SE40 Standard Cylinder SE40X60H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a hot-gate cutter on a plastic injection molding machine, where the 60 mm stroke provides rapid trimming motion and the FKM seal survives ambient heat radiating from the mold.
Drives the lower sealing jaw on a continuous flow wrapper, using its 628 N push force to maintain crisp seal pressure against heated film without degrading at elevated temperatures.
Pivots a short diverter arm to sort small baked goods exiting a tunnel oven, leveraging the 40 mm bore's compact profile to fit between tight conveyor belt sections.
Choose this 40 mm bore when an application requires 628 N push at 0.5 MPa. If your load is lighter, stepping down to the 32 mm bore yields 402 N push, while stepping up to the 50 mm bore provides 982 N push. Because this is a standard 60 mm stroke, it drops directly into any ISO 15552 footprint using PT1/4 ports and standard mounting accessories.
Note that a plain SE cylinder drifts if air pressure is lost; it cannot hold a load mid-stroke. The adjustable air cushion at both ends only decelerates the piston near the stroke limits to prevent hard end-stop impacts, but it functions purely as a shock absorber rather than a mechanical lock.
Quick checklist
The SE40X60H generates 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. Equipped with a Viton (FKM) seal, it operates in environments from 0 to 150 C.
Yes, the SE40X60H is dimensionally interchangeable per ISO 15552, meaning it shares standard mounting, port (PT1/4), and rod thread (M12x1.25) dimensions with other ISO 15552 profile cylinders. You can drop it directly into existing hardware without redesigning the mounting plate.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.