verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE40 Standard Cylinder SE40X65

The AirTAC SE40 Standard Cylinder SE40X65 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 65mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke65 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$54.40 $61.90Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE40 stroke, mounting and version on one page All SE40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE40 Standard Cylinder SE40X65

The AirTAC SE40X65 is a double-acting single-rod profile cylinder operating on filtered air, delivering 628 N of push force at 0.5 MPa. Built to the ISO 15552 standard, it features an extruded aluminum barrel without external tie rods, yielding a compact footprint that resists corrosion and mounts flush on packaging machinery.

This unit includes field-adjustable pneumatic cushioning at both ends to soften hard end-stops during its 65 mm stroke. Note that this specific SKU lacks a built-in magnet, meaning it is not equipped for CMSE or DMSE electronic position sensing out of the box.

Airtac SE40 Standard Cylinder SE40X65 Technical Specifications

ModelAirtac SE40 Standard Cylinder SE40X65
SeriesSE ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke65 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE40 Standard Cylinder SE40X65

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
40Bore size in mm.
×65Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE40 Standard Cylinder SE40X65 Is Used

packaging

Carton Erector Flaps

Drives the folding mechanism on continuous-motion carton erectors where 628 N push at 0.5 MPa easily creases heavy corrugated board over a 65 mm travel.

conveyor_belt

Sortation Diverter Arm

Powers a low-profile pneumatic diverter arm on modular conveyor belts, using its 528 N retract force to snap the gate back rapidly without overloading the frame.

precision_manufacturing

PCB Edge Trimming

Actuates a light-duty trimming blade fixture on electronics manufacturing lines, where the tie-rod-free extruded profile prevents dust buildup and allows flush mounting.

Is the Airtac SE40 Standard Cylinder SE40X65 the Right Cylinder?

If 628 N of push at 0.5 MPa is too much force for your delicate assembly tooling, step down to the 32 mm bore which provides 402 N. For heavier indexing tasks requiring more thrust, step up to the 50 mm bore which yields 982 N. Because this is a standard 40 mm bore with a PT1/4 port, it serves as a direct dimensional direct replacement for any ISO 15552 cylinder footprint without changing your mounting hardware.

Remember that the adjustable air cushion only decelerates the piston near the stroke end; it does not hold a load. If air pressure drops, the rod will drift, so applications needing dead-stop holding must use an external pilot-operated check valve or the BSE rod lock variant.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE40 Standard Cylinder SE40X65 FAQ

The SE40X65 provides 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.

Yes, the SE40X65 is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other ISO 15552 profile cylinders. It uses a PT1/4 port and M12x1.25 rod thread, but note this specific SKU lacks the magnet for CMSE/DMSE sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE40 Standard Cylinder SE40X65

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE40X65 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.