
The AirTAC SE40 Standard Cylinder SE40X650 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 650mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X650 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 650 mm stroke. Operating at 0.5 MPa, it generates 628 N of push force and 528 N of pull force, scaling to 879 N push at 0.7 MPa. Because this 650 mm stroke exceeds the standard 1200 mm maximum for the 40 mm bore, it is manufactured as a made-to-order unit to fit your specific long-travel machinery requirements.
Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine frames. The integrated pneumatic cushioning at both ends is field-adjustable via a screw, letting you tune end-of-stroke deceleration to prevent hard impacts during high-speed 30-800 mm/s operations. This specific SKU lacks the -S magnet option, meaning it is not equipped out-of-the-box for CMSE or DMSE position sensing.
| Model | Airtac SE40 Standard Cylinder SE40X650 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushes corrugated cartons onto outbound palletizer lanes using its 650 mm stroke, with field-adjustable cushions softening the 628 N end-of-stroke impact at high cycle rates.
Positions sheet metal backstops on a press brake, leveraging the extruded tie-rod-free profile for flush mounting while the 16 mm rod resists minor deflection during part contact.
Extends sample trays into laboratory analyzers over a 650 mm travel, relying on the 30-800 mm/s speed range and adjustable end cushions to protect delicate glass vials from sudden stops.
If your application requires less thrust, stepping down to the 32 mm bore yields 402 N of push at 0.5 MPa, whereas moving up to the 50 mm bore provides 982 N of push. For this 650 mm stroke, the 40 mm bore is a solid fit, but note that long unsupported strokes place bending loads on the M12x1.25 rod and its bearing; always utilize an external guide to prevent side-load damage. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting hardware, features a PT1/4 port, and relies on standard TPU seals. Remember that a plain SE cylinder will drift if air pressure is lost; for position holding, consider a BSE rod lock variant.
Quick checklist
The SE40X650 delivers 628 N push and 528 N pull at 0.5 MPa, increasing to 879 N push at 0.7 MPa, with a maximum push of 128 kgf at 1.0 MPa. It features a 40 mm bore, 650 mm non-standard stroke, PT1/4 port, M12x1.25 rod thread, and operates at 30-800 mm/s.
Yes, the SE40X650 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and accessory interface of other ISO 15552 profile cylinders, allowing for a direct retrofit without modifying your existing machinery.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.