verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE40 Standard Cylinder SE40X670S

The AirTAC SE40 Standard Cylinder SE40X670S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 670mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke670 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$120.73 $128.23Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE40 stroke, mounting and version on one page All SE40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE40 Standard Cylinder SE40X670S

The AirTAC SE40X670S is a double-acting, single-rod ISO 15552 profile cylinder featuring a 40mm bore and 670mm stroke. It delivers 628N of push force at 0.5 MPa and 879N at 0.7 MPa, making it well-suited for mid-range automation tasks. The included -S magnet enables direct position feedback using AirTAC CMSE reed or DMSE electronic sensors.

Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against frames. The field-adjustable pneumatic cushioning at both ends can be tuned with a screw to soften hard end stops during high-speed cycling, protecting payloads and extending equipment life.

Airtac SE40 Standard Cylinder SE40X670S Technical Specifications

ModelAirtac SE40 Standard Cylinder SE40X670S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke670 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE40 Standard Cylinder SE40X670S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
40Bore size in mm.
×670Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE40 Standard Cylinder SE40X670S Is Used

conveyor_belt

Carton Flap Folding

Drives the mechanical arms on case erecting lines, using the 670mm stroke to fully extend and fold major carton flaps before tape sealing.

warehouse

Pallet Push-Off

Executes 628N push strokes at 0.5 MPa to slide boxed inventory from an accumulation roller bed onto a wooden pallet.

science

Sample Tube Indexing

Shifts laboratory sample tube racks down a processing line, relying on the -S magnet and DMSE sensors to confirm full 670mm extension.

Is the Airtac SE40 Standard Cylinder SE40X670S the Right Cylinder?

At 670mm, this stroke utilizes the maximum standard extension for a 40mm bore while staying within the 1200mm catalog limit. If your application requires less force, stepping down to a 32mm bore yields 402N of push at 0.5 MPa, whereas moving up to a 50mm bore provides 982N. Because this is a plain double-acting cylinder, it cannot hold a load if air pressure is lost; a BSE rod lock variant is required for failsafe position holding.

For a 670mm stroke, the unsupported piston rod is highly susceptible to side-load bending; always use an external guide to prevent rod-bearing damage. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, matching the PT1/4 port and M12x1.25 rod thread.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE40 Standard Cylinder SE40X670S FAQ

The SE40X670S generates 628N of push force and 528N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 879N, and it reaches a maximum push force of 128 kgf at 1.0 MPa.

Yes, the SE40X670S is dimensionally interchangeable with other ISO 15552 profile cylinders, sharing the same mounting footprint and PT1/4 port size. The adjustable air cushion at both ends can be tuned to match the deceleration requirements of your existing setup.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE40 Standard Cylinder SE40X670S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE40X670S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.