
The AirTAC SE40 Standard Cylinder SE40X680S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 680mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X680S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 680 mm stroke. It generates 628 N of push force and 528 N of pull force at 0.5 MPa, making it well-suited for mid-range actuation tasks. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machine envelopes.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration via a set screw, softening impacts during high-speed 30-800 mm/s operations.
| Model | Airtac SE40 Standard Cylinder SE40X680S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 680 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×680 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides reliable 628 N push at 0.5 MPa to actuate routing gates on high-speed beverage conveyor systems over its 680 mm stroke.
Utilizes the built-in magnet and DMSE sensors to confirm cardboard folding arm position on automated packaging machinery.
Delivers raw material blanks into stamping presses, using adjustable end cushions to soften stops at fast cycle speeds.
When sizing this 40 mm bore actuator, consider stepping down to a 32 mm bore for lighter loads (providing 402 N push at 0.5 MPa) or stepping up to a 50 mm bore if your application requires greater thrust (offering 982 N push at 0.5 MPa). As a true ISO 15552 profile cylinder, the SE40X680S serves as a direct replacement for other ISO 15552 cylinders, sharing standardized mounting dimensions, PT1/4 ports, and M12x1.25 rod threads. To match this exact configuration, specify the 40 mm bore, 680 mm stroke, built-in magnet (-S), and your required mounting accessory.
Because the 680 mm stroke is substantial, the unsupported piston rod is susceptible to bending under heavy side loads. For optimal longevity and to prevent rod-bearing wear, pair this cylinder with an external guide rail to absorb lateral forces.
Quick checklist
The SE40X680S delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa, and a push force of 879 N at 0.7 MPa. The maximum push force is 128 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
No, the SE40X680S is a standard double-acting cylinder and will drift if air is lost. The adjustable air cushion at both ends only decelerates the piston near the stroke end and does not function as a brake or lock. For position holding, consider the BSE rod lock series or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.