
The AirTAC SE40 Standard Cylinder SE40X700 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X700 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa over a 700 mm stroke. Its square extruded aluminum barrel omits external tie rods entirely, yielding a compact, flush-mounting body that naturally resists corrosion and simplifies sensor placement along three integrated grooves.
This specific SKU is configured without a position-sensing magnet, relying instead on its field-adjustable pneumatic cushioning at both ends to decelerate the 16 mm rod smoothly. Because it adheres to the ISO 15552 / VDMA 24562 mounting interface, it serves as a direct, direct dimensional replacement for comparable profile cylinders without requiring custom brackets.
| Model | Airtac SE40 Standard Cylinder SE40X700 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 628 N extend force to push corrugated cartons from a roller conveyor onto a palletizing station, utilizing the full 700 mm stroke to bridge the machine gap.
Leverages the 700 mm stroke to shift heavy fabric beams laterally between processing stages, taking advantage of the hard-chrome 16 mm rod for reliable linear translation.
Deploys the long stroke to open and close heavy discharge gates on automated pallet magazines, relying on the adjustable end cushions to soften impacts at high travel speeds.
When sizing this 40 mm bore model, compare its 628 N push force at 0.5 MPa against your actual load: the smaller 32 mm bore provides 402 N, while the larger 50 mm bore steps up to 982 N. This SE40X700 ships without a magnet, so if your application requires position feedback, you must select the -S option to enable CMSE reed or DMSE electronic sensors. For replacing an existing ISO 15552 unit, match the 700 mm stroke, PT1/4 port, and your specific mounting accessory (such as FA or TC).
Because this cylinder features a 700 mm stroke, the extended 16 mm rod generates significant leverage and bending moments under side loads. To prevent premature rod-bearing wear, always pair this unit with an external guide rail to support the load independently of the piston rod.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
No, the SE40X700 is a standard double-acting cylinder and will drift if air pressure is lost or the valve is centered. Its adjustable air cushions only decelerate the piston near the end of the stroke; they do not lock the rod. For load-holding, consider the BSE rod-lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.