
The AirTAC SE40 Standard Cylinder SE40X700SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X700SLB is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 700 mm stroke. It features a 40 mm bore that generates 628 N of push force at 0.5 MPa, making it well-suited for mid-range automation tasks. This variant includes an LB foot mounting bracket for secure horizontal installation and a built-in magnet for position sensing.
The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant profile that mounts flush in tight spaces. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration, effectively softening hard impacts when cycling at speed. The integrated magnet directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position confirmation.
| Model | Airtac SE40 Standard Cylinder SE40X700SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 700 mm stroke and 628 N push to extend a diverting arm across a conveyor belt, smoothly routing boxes to secondary packaging lines.
Provides the extended reach and mid-level thrust needed to push empty pallets into a stacking magazine without requiring an oversized bore.
Actuates a long-stroke loading mechanism that pushes raw bar stock into a lathe spindle, relying on the LB mount for stable horizontal alignment.
With a 628 N push at 0.5 MPa, this 40 mm bore is a solid mid-range choice. If your load requires less force, the 32 mm bore offers 402 N; if you need more thrust, stepping up to the 50 mm bore provides 982 N. Because this is a double-acting cylinder, it relies on continuous air pressure to hold position—if air is lost or the valve centers, the piston will drift, so a BSE rod lock is necessary for fail-safe holding.
At 700 mm of stroke, the unsupported rod length increases susceptibility to bending under side loads. To prevent premature rod-bearing wear, pair this cylinder with an external guide rail to support the load. For retrofits, its standardized ISO 15552 dimensions, PT1/4 port, and LB mounting interface make it a direct replacement for other ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N, with a maximum thrust of 128 kgf at 1.0 MPa. The 700 mm stroke falls within the standard 1200 mm maximum for this bore size.
No. The adjustable air cushion at both ends only decelerates the piston near the stroke end; it is not a locking mechanism. If air is exhausted or pressure drops, the piston will drift. For fail-safe load holding, you need a BSE series rod lock or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.