
The AirTAC SE40 Standard Cylinder SE40X720S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 720mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X720S is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. Delivering 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa, it provides reliable linear motion for mid-range actuation. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal components from harsh environments.
Equipped with a built-in magnet, this unit interfaces seamlessly with AirTAC CMSE reed and DMSE electronic sensors to track piston position along its 720 mm travel. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, effectively softening hard impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE40 Standard Cylinder SE40X720S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 720 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×720 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives diverter arms on packaging conveyor lines, utilizing the 720 mm stroke to fully clear product lanes while the 628 N push force reliably overcomes carton friction.
Depalletizes stacked components by sweeping layers sideways, where the tie-rod-free extruded profile prevents debris buildup and the adjustable cushion protects loads at end-of-stroke.
Positions multi-bay testing carriages in analytical equipment, leveraging the CMSE/DMSE magnet compatibility for precise positional feedback without external switches.
Generating 628 N push at 0.5 MPa, this 40 mm bore is a solid mid-range choice. If your application requires less force, stepping down to the 32 mm bore yields 402 N push; if you need substantially more power, the 50 mm bore provides 982 N push. Because this is a double-acting cylinder, it relies on continuous air pressure to maintain position—if air is lost or the valve is centered, the piston will drift, requiring an external rod lock or pilot-operated check valve for load holding.
At 720 mm of stroke, the 16 mm rod and front bearing face significant bending moments under side loads, making an external guide rail essential to prevent premature wear. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing mounting hardware and port connections (PT1/4) during retrofits.
Quick checklist
The SE40X720S generates 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum of 128 kgf at 1.0 MPa. It features a PT1/4 port and a 16 mm rod with an M12x1.25 thread.
Yes, the SE40X720S is dimensionally interchangeable per ISO 15552 standards. You can replace existing ISO 15552 profile cylinders without modifying the mounting footprint or sensor rail layout.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.