verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE40 Standard Cylinder SE40X75S

The AirTAC SE40 Standard Cylinder SE40X75S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 75mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke75 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$57.19 $64.69Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE40 stroke, mounting and version on one page All SE40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE40 Standard Cylinder SE40X75S

The AirTAC SE40X75S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. It delivers a 628 N push force at 0.5 MPa over a 75 mm stroke, utilizing a 16 mm hard-chrome rod and a PT1/4 port. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant housing that simplifies mounting in tight machine cells.

Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors along the three integrated lateral grooves. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s.

Airtac SE40 Standard Cylinder SE40X75S Technical Specifications

ModelAirtac SE40 Standard Cylinder SE40X75S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke75 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE40 Standard Cylinder SE40X75S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
40Bore size in mm.
×75Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE40 Standard Cylinder SE40X75S Is Used

packaging

Carton Flap Folding

Drives the mechanical arms that tuck and seal corrugated carton flaps on packaging lines, where the 628 N push force reliably overcomes cardboard stiffness within the 75 mm stroke.

conveyor_belt

Bottle Lane Diverting

Actuates routing gates to sort filled beverage bottles on a conveyor, using the integrated -S magnet and DMSE sensors to confirm gate position for the PLC.

precision_manufacturing

PCB Test Fixture

Moves an electronic test probe head down onto printed circuit boards, relying on the adjustable pneumatic cushion to decelerate the 16 mm rod gently and prevent damaging delicate components.

Is the Airtac SE40 Standard Cylinder SE40X75S the Right Cylinder?

Selecting this 40 mm bore makes sense when an application requires roughly 628 N of push at 0.5 MPa. If your load is lighter, stepping down to the 32 mm bore yields 402 N of push, conserving space and air consumption. Conversely, if you need more authority, the 50 mm bore provides 982 N of push. Because this is a double-acting cylinder, it will drift if air pressure is lost or the valve centers; applications requiring strict load holding without live pressure should integrate an external pilot-operated check valve or evaluate the BSE rod-lock variant.

As a true ISO 15552 profile cylinder, the SE40X75S provides direct dimensional interchangeability with other ISO 15552 cylinders, streamlining retrofits. To complete the assembly, match the 40 mm bore, 75 mm stroke, PT1/4 porting, and your desired mounting accessory (such as an FA front flange or LB foot), and ensure you specify CMSE or DMSE sensors to utilize the integrated magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE40 Standard Cylinder SE40X75S FAQ

The SE40X75S delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE40X75S is dimensionally interchangeable per ISO 15552 standards. Its standardized mounting interface and profile barrel allow it to serve as a direct replacement for other ISO 15552 cylinders, provided you match the 40 mm bore, 75 mm stroke, and PT1/4 port.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE40 Standard Cylinder SE40X75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE40X75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.