
The AirTAC SE40 Standard Cylinder SE40X800SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 800mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X800SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It features a robust 40 mm bore and an 800 mm stroke, generating 628 N of push force and 528 N of pull force at 0.5 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machinery spaces while naturally resisting mechanical wear.
Equipped with an NBR seal, this unit reliably operates within standard temperature ranges, and its built-in magnet (-S) provides seamless compatibility with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushioning at both ends allows technicians to tune deceleration via a set screw, effectively softening hard end stops during high-speed 30-800 mm/s cycling.
| Model | Airtac SE40 Standard Cylinder SE40X800SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Ideal for actuating heavy lane diverters on 800 mm conveyor sections, using its 628 N push force to reliably shift loaded pallets at high cycling speeds.
Drives the folding mechanisms in continuous carton erectors, where the NBR seal withstands rapid 30-800 mm/s cycling and the magnet triggers DMSE sensors for timing.
Raises and lowers automated security gates or machine safety doors over an 800 mm span, relying on the field-adjustable cushions to prevent slamming at the top end.
When sizing this 40 mm bore model, consider stepping down to the 32 mm version if your load requires less energy, as it provides 402 N of push at 0.5 MPa. Conversely, if your application demands greater thrust, the next size up is the 50 mm bore, which delivers 982 N of push at 0.5 MPa. Because this cylinder features an 800 mm stroke, the extended 16 mm rod and M12x1.25 thread can introduce bending moments under heavy lateral loads; adding an external guide rail is highly recommended to prevent premature rod-bearing wear.
As a true ISO 15552 profile cylinder, the SE40X800SN offers a direct dimensional replacement for other standardized ISO 15552 cylinders, simplifying retrofits and sharing standard mounting hardware. Note that while its adjustable cushions soften end-of-stroke impacts, they do not lock or hold the load if air pressure is lost or the valve is centered—the piston will drift without live pressure. To configure, specify the 40 mm bore, 800 mm stroke, PT1/4 port, NBR seal, and the required mounting accessory.
Quick checklist
The SE40X800SN features a 40 mm bore and a PT1/4 port. It delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force increases to 879 N, and it reaches a maximum push of 128 kgf at 1.0 MPa.
Yes, the SE40X800SN is dimensionally interchangeable per the ISO 15552 / VDMA 24562 standard. It serves as a direct replacement for other ISO 15552 profile cylinders, sharing standard mounting dimensions and hardware without requiring custom brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.