
The AirTAC SE40 Standard Cylinder SE40X80H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 80mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X80H is a double-acting single-rod ISO 15552 profile cylinder engineered for hot environments. Equipped with a Viton (FKM) seal, it withstands operating temperatures up to 150 C, making it ideal for ovens, foundries, and thermal processes where standard elastomers fail. It delivers a robust 628 N push force at 0.5 MPa and features a 16 mm hard-chrome rod with an M12x1.25 thread.
The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant profile that mounts flush against machinery. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration for a 80 mm travel, protecting payloads from hard impacts. This SKU is supplied without a position-sensing magnet, prioritizing mechanical actuation in high-temperature zones where electronic reed switches might degrade.
| Model | Airtac SE40 Standard Cylinder SE40X80H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
With its 150 C FKM seal, this cylinder survives the radiant heat of injection molding platens, providing 628 N of push to eject plastic parts reliably.
Acting as a lane gate inside a 80 mm stroke, the Viton seal resists hot oven exhaust while routing baked goods through cooling channels.
Moves high-temperature wafer processing trays with precise 528 N retraction force, leveraging the no-tie-rod profile for clean, flush mounting.
Choose this 40 mm bore when a task requires roughly 628 N of push at 0.5 MPa. If your assembly needs less force, step down to the 32 mm bore (402 N push); for heavier lifting, step up to the 50 mm bore (982 N push). Because this is a high-heat FKM variant, ensure your pneumatic plumbing uses compatible high-temp tubing. As a true ISO 15552 profile cylinder, it serves as a dimensionally interchangeable direct replacement for other ISO 15552 cylinders, sharing standardized mounting and port PT1/4 interfaces. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If your process loses air pressure and the rod must not drift, specify a BSE rod-lock cylinder or an external pilot-operated check valve.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force reaches 879 N, with a maximum push of 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, speed range is 30-800 mm/s, and the FKM seal extends the operating temperature to 150 C.
This specific SKU lacks the built-in magnet (-S) required for CMSE or DMSE sensors. However, it is a true ISO 15552 profile cylinder, meaning it is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing mounting hardware and accessories without frame modifications.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.