verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE40 Standard Cylinder SE40X85

The AirTAC SE40 Standard Cylinder SE40X85 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 85mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke85 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$56.52 $64.02Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE40 stroke, mounting and version on one page All SE40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE40 Standard Cylinder SE40X85

The AirTAC SE40X85 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force and 528 N of pull force at 0.5 MPa. Because it uses an extruded aluminum barrel without external tie rods, it offers a compact, corrosion-resistant body that mounts flush against machine frames, simplifying spatial constraints in tight assemblies.

This 40 mm bore unit features a 16 mm rod and a PT1/4 port. It includes field-adjustable air cushioning at both ends, allowing technicians to tune the end-of-stroke deceleration via a screw rather than relying on a fixed bumper. This specific SKU is built without a magnet, so it does not support direct CMSE or DMSE position sensing out of the box.

Airtac SE40 Standard Cylinder SE40X85 Technical Specifications

ModelAirtac SE40 Standard Cylinder SE40X85
SeriesSE ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke85 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE40 Standard Cylinder SE40X85

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
40Bore size in mm.
×85Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE40 Standard Cylinder SE40X85 Is Used

packaging

Carton Sealer Flap Folding

Provides the 628 N push at 0.5 MPa required to fold and press heavy corrugated cardboard flaps on continuous packaging lines.

conveyor_belt

Pallet Diverting Gate

Uses the 85 mm stroke to actuate a routing gate, smoothly diverting wooden pallets between adjacent roller conveyor tracks.

precision_manufacturing

CNC Fixture Clamping

Secures aluminum castings inside a CNC milling station, utilizing the adjustable cushion to soften the 16 mm rod extension against hard stops.

Is the Airtac SE40 Standard Cylinder SE40X85 the Right Cylinder?

If you are sizing this 85 mm stroke actuator, consider stepping down to a 32 mm bore for lighter loads (402 N push at 0.5 MPa) or up to a 50 mm bore for heavier tasks (982 N push at 0.5 MPa). As a true ISO 15552 profile cylinder, this unit is dimensionally interchangeable with other ISO 15552 cylinders, making it a direct retrofit that reuses your existing mounting hardware and PT1/4 pneumatic connections. Note that the adjustable air cushion only decelerates the piston near the stroke ends; it does not lock or hold the load if air pressure is lost. For applications requiring position holding without live pressure, explore the BSE rod lock variant.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE40 Standard Cylinder SE40X85 FAQ

The SE40X85 generates 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum of 128 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.

Yes, the SE40X85 is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement using your existing mounting accessories and PT1/4 pneumatic ports.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE40 Standard Cylinder SE40X85

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE40X85 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.