
The AirTAC SE40 Standard Cylinder SE40X850 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 850mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X850 is a double-acting single-rod ISO 15552 profile cylinder engineered for a non-standard 850 mm stroke. It delivers a robust 628 N push force at 0.5 MPa, utilizing a 16 mm hard-chrome piston rod and an M12x1.25 rod-end thread. The extruded aluminum square barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Because this SKU lacks the S magnet code, it arrives without a built-in position sensor. For end-position detection, you would either upgrade to an S-coded variant or use external limit switches. The field-adjustable pneumatic cushioning at both ends allows you to dial in end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE40 Standard Cylinder SE40X850 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 850 mm stroke to push corrugated cartons from a packaging conveyor to a taping station, relying on the 628 N push force to overcome box friction.
Leverages the long 850 mm travel to shift heavy fabric beams horizontally into the weaving loom loading cradle without requiring complex linkages.
Extends fully to actuate a diverter arm on a roller conveyor, routing totes into a secondary warehouse sorting lane using stable 0.5 MPa thrust.
This 40 mm bore generates 628 N push at 0.5 MPa. If your application requires less force, stepping down to the 32 mm bore yields 402 N. If you need more thrust, the 50 mm bore provides 982 N. As a non-standard 850 mm stroke exceeding the 40 mm bore's 1200 mm standard limit, this cylinder is made-to-order. At 850 mm of travel, the 16 mm rod is highly susceptible to side-load bending; an external guide rail is strongly recommended to prevent premature rod-bearing wear.
For ISO 15552 dimensional interchangeability, this model uses a PT1/4 port and accepts standard mounting accessories like FA front flanges or LB foot brackets. Remember that a plain SE cylinder drifts when air pressure is lost or the valve centers—it cannot hold a load. If your 850 mm stroke requires secure positioning during an emergency stop or air loss, specify the BSE rod-lock variant instead.
Quick checklist
The 40 mm bore generates 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it serves as a direct replacement for other ISO 15552 profile cylinders using the same PT1/4 port and 40 mm mounting dimensions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.