
The AirTAC SE40 Standard Cylinder SE40X85S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 85mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X85S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. Driven by its 40 mm bore and 85 mm stroke, it provides reliable linear motion for mid-range automation tasks. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
Because this unit includes the -S magnet code, it supports direct position sensing using AirTAC CMSE reed or DMSE electronic switches that slide into the body's integral sensor grooves. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE40 Standard Cylinder SE40X85S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 628 N push and 85 mm travel needed to fold corrugated cardboard flaps on high-speed packaging lines prior to tape sealing.
Actuates routing gates on parcel conveyors, using the integrated -S magnet to confirm stroke position via DMSE electronic sensors.
Secures aluminum castings inside CNC machining centers, relying on the adjustable pneumatic cushions to prevent shock at the 85 mm stroke end.
When sizing this 40 mm bore actuator, compare its 628 N push at 0.5 MPa against your actual load. If your application requires less force, stepping down to the 32 mm bore yields 402 N of push; stepping up to the 50 mm bore provides 982 N. This SE40X85S configuration features a PT1/4 port, an M12x1.25 rod thread, and the -S magnet for standard CMSE / DMSE sensors. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for any standard ISO 15552 cylinder without requiring custom mounting brackets. Note that a plain double-acting cylinder drifts if air pressure is lost or the valve is centered; if your process must hold a load mechanically without live pressure, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
At 0.5 MPa, the SE40X85S generates 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N. The maximum push force is 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE40X85S is built to the ISO 15552 / VDMA 24562 dimensional standard, meaning it shares the exact same mounting interface and hole spacing as other ISO 15552 profile cylinders. You can drop it into existing setups using your current FA, LB, or TC mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.