
The AirTAC SE40 Standard Cylinder SE40X87S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 87mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X87S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 628 N at 0.5 MPa. Its 87 mm stroke is a non-standard made-to-order dimension, tailored precisely for specialized machine spacing requirements without forcing you into a shorter or longer off-the-shelf stroke.
The extruded aluminum barrel omits external tie rods, yielding a compact body that mounts flush against frames while resisting corrosion. Equipped with a built-in magnet (S option), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors for precise end-of-stroke verification.
| Model | Airtac SE40 Standard Cylinder SE40X87S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 87 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×87 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the exact 87 mm travel needed to fold corrugated cardboard flaps on packaging lines, utilizing the 628 N push force to cleanly crease heavy materials without overshooting the stroke.
Actuates routing gates on conveyor systems; the flush extruded profile allows tight mounting between rollers, while the DMSE electronic sensor confirms gate position for the PLC.
Inserts bushings or pins into machined aluminum housings on an assembly fixture, relying on the field-adjustable end cushions to soften the impact at the precise 87 mm stroke limit.
This 40 mm bore provides a push force of 628 N at 0.5 MPa. If your application requires less force, stepping down to the 32 mm bore yields 402 N; if you need more thrust, stepping up to the 50 mm bore provides 982 N. Because the 87 mm stroke is non-standard, expect a made-to-order lead time. The PT1/4 port and M12x1.25 rod thread make it dimensionally interchangeable with other ISO 15552 cylinders, ensuring a seamless retrofit using existing FA or LB mounting hardware.
Note that a plain SE cylinder will drift if air pressure is lost or the valve is centered, as the adjustable air cushions at both ends only decelerate the piston near stroke end and do not function as a locking mechanism. For vertical loads requiring position holding without live pressure, consider the BSE rod lock variant.
Quick checklist
At 0.5 MPa, the 40 mm bore provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE40X87S is dimensionally interchangeable with other ISO 15552 profile cylinders. It shares the standardized mounting interface, PT1/4 port, and M12x1.25 rod thread, allowing you to drop it into existing setups using the same mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.