
The AirTAC SE40 Standard Cylinder SE40X90 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 90mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X90 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force and 528 N of pull force at 0.5 MPa. Its 90 mm stroke and 40 mm bore make it a versatile mid-range actuator for general automation. The extruded aluminum barrel features a square profile without external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while eliminating protruding hardware that can catch on moving parts.
Field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration via a setscrew, softening hard impacts when cycling at speeds up to 800 mm/s. This unit lacks a built-in magnet, so it does not support CMSE or DMSE position sensors out of the box. If your workflow requires end-of-stroke signaling, you would need to specify the -S option on a future order.
| Model | Airtac SE40 Standard Cylinder SE40X90 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing flap on a logistics conveyor belt, utilizing the 628 N push force to swiftly redirect medium-weight parcels into sorting lanes.
Drives a mechanical arm that folds corrugated cardboard flaps during end-of-line packaging, relying on the 90 mm stroke for fast, repeatable travel.
Pushes processed test tubes out of a centrifuge carousel, where the extruded no-tie-rod barrel ensures easy wipe-down and no crevices for biological contamination.
Selecting this 40 mm bore makes sense when your application requires the 628 N push at 0.5 MPa it provides. If your load is lighter, stepping down to a 32 mm bore yields 402 N of push force, saving space and air consumption. Conversely, if you need more muscle, stepping up to a 50 mm bore provides 982 N of push force. Because this is a standard double-acting cylinder, it will not hold a load in place if air pressure is lost or the valve is centered—the piston will drift. For position-holding safety, consider the BSE rod-lock variant. As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 profile cylinders, sharing standard mounting hardware like FA front flanges or LB foot brackets. The 90 mm stroke is well below the 1200 mm maximum, keeping the 16 mm rod and M12x1.25 thread highly rigid without requiring an external guide.
Quick checklist
At 0.5 MPa, the SE40X90 delivers 628 N of push force and 528 N of pull force. At 0.7 MPa, push force is 879 N, with a maximum push of 128 kgf at 1.0 MPa. It features a 16 mm rod, an M12x1.25 rod-end thread, and a PT1/4 port.
Yes. The SE40X90 is a true ISO 15552 / VDMA 24562 profile cylinder, meaning its mounting dimensions are standardized. It serves as a direct replacement for other ISO 15552 cylinders, allowing you to reuse existing FA flanges or LB foot brackets without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.