verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE40 Standard Cylinder SE40X900

The AirTAC SE40 Standard Cylinder SE40X900 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 900mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke900 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$140.48 $147.98Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE40 stroke, mounting and version on one page All SE40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE40 Standard Cylinder SE40X900

The AirTAC SE40X900 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 628 N push force at 0.5 MPa across a 900 mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting the bore from shop debris.

This 40 mm bore unit features a PT1/4 port, a 16 mm hard-chrome plated rod, and field-adjustable pneumatic cushioning at both ends to soften end-cap impacts. Note that this specific SKU lacks a built-in magnet, so it cannot host CMSE or DMSE position sensors without modification.

Airtac SE40 Standard Cylinder SE40X900 Technical Specifications

ModelAirtac SE40 Standard Cylinder SE40X900
SeriesSE ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke900 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE40 Standard Cylinder SE40X900

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
40Bore size in mm.
×900Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE40 Standard Cylinder SE40X900 Is Used

conveyor_belt

Pallet Conveyor Diverter

Extending 900 mm to push heavy pallets off a main packaging line, utilizing the 628 N push force to overcome friction without needing a larger bore.

straighten

Long-Stroke Press Ejector

Ejects formed sheet metal parts from a hydraulic press bed, using the adjustable end cushions to safely decelerate the 16 mm rod at high speeds.

warehouse

Vertical Lift Gate Actuator

Raises and lowers a mezzanine safety gate, where the extruded profile barrel provides a flush, tie-rod-free surface that prevents snagging on passing inventory.

Is the Airtac SE40 Standard Cylinder SE40X900 the Right Cylinder?

At 0.5 MPa, this 40 mm bore generates 628 N of push force. If your assembly requires less effort, the 32 mm neighbour offers 402 N, while stepping up to the 50 mm bore provides 982 N for heavier payloads. Because the 900 mm stroke pushes the limits of the 16 mm rod, long unsupported travel invites rod-bearing bending; always support the load with an external linear guide to prevent premature seal wear.

As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other standard profile cylinders. Match your mounting hardware (LB, FA, or TC) and PT1/4 air lines. Remember that a plain SE cylinder relies on live air pressure to move; it will drift if air is lost or the valve is centered, so integrate a BSE rod lock if the application requires fail-safe load holding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE40 Standard Cylinder SE40X900 FAQ

The 40 mm bore produces 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum of 128 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.

No, the adjustable air cushion only decelerates the piston near the stroke ends; it is not a locking mechanism. The cylinder will drift if air pressure is lost. For fail-safe holding, use an AirTAC BSE rod lock or an external pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE40 Standard Cylinder SE40X900

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE40X900 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.