AirTAC Pneumatics
AirTAC Valve Manifolds, Blank Plates & Gasket Kits
AirTAC manifold bases, blank plate kits and gasket kits for 100M to 400M valve families: one common inlet and one common exhaust feeding up to 16 valve stations on a single aluminium block.
inventory_285 models availableSeries Overview
This collection holds the three part kinds that surround AirTAC's mounted valve families: the manifold bases themselves (100M, 200M, 300M, 400M), the blank plate kits that close unused stations, and the gasket or seal kits that renew the seal after a valve has been swapped. The base is an aluminium block with one common inlet and one common exhaust, so a row of individually-plumbed valves becomes a single supply pipe and a single exhaust point.
Base sizes scale with demand: 100M and 200M bases take up to 16 stations with a 1/4" common inlet, 300M up to 12 stations on a 3/8" inlet, and 400M up to 8 stations on a 1/2" inlet. The model code reads directly - 200M4F is a 200-size base, 4 stations, PT thread. Overall length A and mounting pitch KA are computed from the station count, so the exact figures sit on each product page rather than on this range overview.
The kit codes are one character apart and worth learning: R1 is the gasket or seal kit (P-100M-R1), R2 is the blank plate kit (P-100M-R2). A valve-family prefix can appear on either - P-3V200M-R2 blanks a station on a 3V200 manifold, P-7V100M-R1 renews the gaskets on a 7V100 manifold. Pressure at the manifold follows the rating of the valve you mount on it.
Browse Models
Airtac 400M Solenoid Valve Manifold Base 400M14F
SKU: 400M14F
$115.35$122.85
schedule Confirm lead time
Airtac 400M Solenoid Valve Manifold Base 400M16F
SKU: 400M16F
$130.24$137.74
schedule Confirm lead time
Typical Applications
Packing machine valve bank
A carton-packing line with a dozen cylinders per station replaces twelve individually plumbed valves with one 200M base: a single 1/4" supply feeds up to 16 stations, and unused stations stay sealed behind R2 blank plates for later actuators.
Assembly fixture clamp circuit
A welding or assembly fixture running clamps and sensors on 4V valves uses a 300M manifold (up to 12 stations, 3/8" inlet) so the whole clamp bank vents through one common exhaust point instead of a dozen separate lines.
High-demand production cells
Cells with fewer but larger valves - big 4A or 4V bodies - move to the 400M base: up to 8 stations on a 1/2" common inlet sized for the combined draw when several large valves fire together.
MRO spares and valve swaps
Maintenance crews keep one P-xxxx-R1 gasket kit per manifold on the shelf, so when a station weeps after the third valve swap the gasket is renewed in minutes instead of troubleshooting a suspect valve.
How to Choose the Right Model
Count the stations you need today, then add spares: a spare blanked station costs one R2 kit now, while a second manifold later costs a new base, new plumbing and panel space. Match the base to the valve family before anything else - a 4V200 valve does not sit on a 3V200 base - then size the common inlet to the total demand of all stations firing together, not to the flow of a single valve. Close every spare station with its R2 blank plate kit so the manifold still seals.
Keep one R1 gasket kit on the shelf for every manifold: the station gasket is the part that stops sealing after a valve has been removed and refitted a few times, and a weeping station is easily blamed on the valve itself. Five points to confirm before ordering: (1) base size - 100M, 200M, 300M or 400M, matched to your valve family; (2) station count, plus spares; (3) thread of the common inlet - confirm from the part number; (4) kit type, R1 gasket or R2 blank plate; (5) the valve series itself from our /4v-series, /4a-series or /3v-series pages. If your valves are single units plumbed individually rather than manifold-mounted, order the valves with their own ports instead, and add a pneumatic silencer from our /pneumatic-silencers page for the manifold's common exhaust.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and available mounting space
- ✓ Port / thread type (PT / NPT / G)
- ✓ Sensor / magnet option (-S)?
- ✓ Side load — consider a guided model
Frequently Asked Questions
Four base sizes cover the range. 100M and 200M bases accept up to 16 stations with a 1/4" common inlet; 300M up to 12 stations on a 3/8" inlet; 400M up to 8 stations on a 1/2" inlet. Overall length A and mounting pitch KA grow with the station count, so check the exact figures on the individual product page.
One character, two different parts. R1 (e.g. P-100M-R1) is the replacement gasket or seal kit, ordered when a station leaks after a valve has been removed and refitted. R2 (e.g. P-100M-R2) is the blank plate kit - cover plate, gasket and screws - used to seal off a station you deliberately left spare. A valve-family prefix appears when the kit belongs to a specific manifold: P-3V200M-R2 blanks a 3V200 station, P-7V100M-R1 renews a 7V100 manifold's gaskets.
The valve family must match the base: a 4V200 valve does not sit on a 3V200 base, so confirm the family prefix on your valve before choosing the manifold. Valve families themselves are not mixed on a single base. If your valves are stand-alone units rather than manifold type, order them with individual ports from the /4v-series, /4a-series or /3v-series pages.
Yes - AirtacDistr is an authorized export seller of genuine AirTAC parts, and every manifold, blank plate kit and gasket kit here is a current, in-production part, so nothing is a replacement or superseded code. All listed parts are orderable; send us the exact code and quantity and we confirm the lead time.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote
Send us the model number, quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.